adapters raid dell h810

#PERC H810

Profile: Basic RAID

• Press Ctrl+R when prompted during boot

• Choose the revlevant adapter from the list

• Under VD Mgt, Select the controller card in the list, press F2 to 'Clear Config'

• Press F2 to 'Create New VD'

• Select the Raid level, Disks, VD Size, VD Name and set policy for the disk

• Note Raid configuration on asset sheet, including VD Name, Raid Level Number of disks and size

• Once Created, Highlight the new VD in the list, press F2, select Initialization -> Fast Init

• Repeat for each RAID disk required