blynk-library-ez-connect

Blynk example for Marvell® EZ-Connect™ MW302

Getting Started

Here are the instructions for AWS IoT Starter Kit on Linux. Feel free to adjust them to your board and OS.

1. Download and install Marvell's EZ-Connect Lite SDK
2. Download this example, put it in blynk-library-ez-connect subfolder of SDK root
3. Register your Blynk account and create a Project, so you get a Blynk Auth Token
4. In src/main.cpp, adjust WIFI_SSID, WIFI_PASS and BLYNK_AUTH
5. Navigate to SDK root: cd ez-connect-lite
6. Build: make APP=blynk-library-ez-connect clean all -j9
7. Flash: sudo python sdk/tools/OpenOCD/flashprog.py --mcufw ./bin/mw302_rd/blynk.bin
8. Open serial console: cu -l /dev/ttyUSB1 -s 115200. (Hint: type ~. when you want close it)
9. Done. Reset the board to start the firmware