add aeotec 8 series new

drivers/SmartThings/zwave-sensor/fingerprints.yml

@@ -560,6 +560,60 @@ zwaveManufacturer:
     productType: 0x0100
     productId: 0x0082
     deviceProfileName: shelly-wave-motion
+  - id: "aeotec/contact/8/eu"
+    deviceLabel: Aeotec Door Window Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0002
+    productId: 0x0037
+    deviceProfileName: aeotec-door-window-sensor-8
+  - id: "aeotec/contact/8/us"
+    deviceLabel: Aeotec Door Window Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0102
+    productId: 0x0037
+    deviceProfileName: aeotec-door-window-sensor-8
+  - id: "aeotec/contact/8/au"
+    deviceLabel: Aeotec Door Window Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0202
+    productId: 0x0037
+    deviceProfileName: aeotec-door-window-sensor-8
+  - id: aeotec/aerq/8/eu
+    deviceLabel: Aeotec aerQ 8
+    manufacturerId: 0x0371
+    productType: 0x0002
+    productId: 0x0039
+    deviceProfileName: aeotec-aerq-8
+  - id: aeotec/aerq/8/us
+    deviceLabel: Aeotec aerQ 8
+    manufacturerId: 0x0371
+    productType: 0x0102
+    productId: 0x0039
+    deviceProfileName: aeotec-aerq-8
+  - id: aeotec/aerq/8/au
+    deviceLabel: Aeotec aerQ 8
+    manufacturerId: 0x0371
+    productType: 0x0202
+    productId: 0x0039
+    deviceProfileName: aeotec-aerq-8
+  - id: "aeotec/water/8/eu"
+    deviceLabel: Aeotec Water Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0002
+    productId: 0x0038
+    deviceProfileName: aeotec-water-sensor-8
+  - id: "aeotec/water/8/us"
+    deviceLabel: Aeotec Water Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0102
+    productId: 0x0038
+    deviceProfileName: aeotec-water-sensor-8
+  - id: "aeotec/water/8/au"
+    deviceLabel: Aeotec Water Sensor 8
+    manufacturerId: 0x0371
+    productType: 0x0202
+    productId: 0x0038
+    deviceProfileName: aeotec-water-sensor-8
 zwaveGeneric:
   - id: "GenericSensorAlarm"
     deviceLabel: Z-Wave Sensor

drivers/SmartThings/zwave-sensor/profiles/aeotec-aerq-8.yml

@@ -0,0 +1,133 @@
+name: aeotec-aerq-8
+components:
+- id: main
+  capabilities:
+  - id: temperatureMeasurement
+    config:
+      values:
+        - key: "temperature.value"
+          range: [-10, 60]
+    version: 1
+  - id: relativeHumidityMeasurement
+    version: 1
+  - id: dewPoint
+    version: 1
+    config:
+      values:
+        - key: "dewpoint.value"
+          range: [-10, 60]
+  - id: moldHealthConcern
+    config:
+      values:
+        - key: "moldHealthConcern.value"
+          enabledValues:
+            - good
+            - moderate
+    version: 1
+  - id: tamperAlert
+    version: 1
+  - id: powerSource
+    version: 1
+    config:
+      values:
+        - key: "powerSource.value"
+          enabledValues:
+            - battery
+            - dc
+  - id: battery
+    version: 1
+  - id: refresh
+    version: 1
+  categories:
+  - name: TempHumiditySensor
+preferences:
+  - name: "parameter1"
+    title: "1 Set threshold Check Time"
+    description: "When using battery power, follow this configuration, the minimum time is 30 seconds. When using USB power supply, for real-time detection."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 2678400
+      default: 900
+  - name: "parameter2"
+    title: "2 Min. temperature change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 20
+  - name: "parameter3"
+    title: "3 Min. humidity change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 50
+  - name: "parameter4"
+    title: "4 Enable led indication"
+    description: "This parameter defines when the green or red LED will indicate events. Disabling all indications may extend battery life. Off means no indications."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Off"
+        1: "On"
+      default: 0
+  - name: "parameter13"
+    title: "13 Mold alarm offset"
+    desccription: "Increase the humidity threshold."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -10
+      maximum: 10
+      default: 0
+  - name: "parameter23"
+    title: "23 Low battery threshold"
+    description: "Report low battery report when level goes under threshold setting."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 10
+      maximum: 50
+      default: 20
+  - name: "parameter24"
+    title: "24 Periodic Reports"
+    description: "The period of battery, temperature and humidity report, the minimum time is 30 seconds."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 2678400
+      default: 43200
+  - name: "parameter25"
+    title: "25 Offset value for temperature"
+    description: "Calibrate temperature. Scale is defined by Param 64 .eg: Value 15 means 1.5°C or 1.5F"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum: 200
+      default: 0
+  - name: "parameter26"
+    title: "26 Offset value for Humidity"
+    description: "Calibrate humidity."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum: 200
+      default: 0
+  - name: "parameter64"
+    title: "64 Temperature Scale"
+    description: "Scale for auto reports and settings."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Celsius"
+        1: "Fahrenheit"
+      default: 0

drivers/SmartThings/zwave-sensor/profiles/aeotec-door-window-sensor-8.yml

@@ -0,0 +1,197 @@
+name: aeotec-door-window-sensor-8
+components:
+- id: main
+  capabilities:
+  - id: contactSensor
+    version: 1
+  - id: temperatureMeasurement
+    version: 1
+    config:
+      values:
+        - key: "temperature.value"
+          range: [-10, 60]
+  - id: relativeHumidityMeasurement
+    version: 1
+  - id: dewPoint
+    version: 1
+    config:
+      values:
+        - key: "dewpoint.value"
+          range: [-10, 60]
+  - id: moldHealthConcern
+    version: 1
+    config:
+      values:
+        - key: "moldHealthConcern.value"
+          enabledValues:
+            - good
+            - moderate
+  - id: tamperAlert
+    version: 1
+  - id: powerSource
+    version: 1
+    config:
+      values:
+        - key: "powerSource.value"
+          enabledValues:
+            - battery
+            - dc
+  - id: threeAxis
+    version: 1
+  - id: battery
+    version: 1
+  - id: refresh
+    version: 1
+categories:
+  - name: ContactSensor
+metadata:
+  deviceType: ContactSensor
+  ocfDeviceType: x.com.st.d.sensor.contact
+  deviceTypeId: ContactSensor
+preferences:
+  - name: "parameter1"
+    title: "1 Set threshold Check Time"
+    description: "When using battery power, follow this configuration, the minimum time is 30 seconds. When using USB power supply, for real-time detection."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 2678400
+      default: 900
+  - name: "parameter2"
+    title: "2 Min. temperature change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 20
+  - name: "parameter3"
+    title: "3 Min. humidity change to report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 50
+  - name: "parameter5"
+    title: "5 State when the magnet is close"
+    description: "This parameter allows to set the states of door/window when the magnet closes to the sensor."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Open=magnet far, Closed=magnet near"
+        1: "Closed=magnet far, Open=magnet near"
+      default: 0
+  - name: "parameter13"
+    title: "13 Mold alarm offset"
+    desccription: "Increase the humidity threshold."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -10
+      maximum: 10
+      default: 0
+  - name: "parameter23"
+    title: "23 Low battery threshold"
+    description: "Report low battery report when level goes under threshold setting."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 10
+      maximum: 50
+      default: 20
+  - name: "parameter24"
+    title: "24 Periodic Reports"
+    description: "The period of battery, temperature and humidity report, the minimum time is 30 seconds."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 2678400
+      default: 43200
+  - name: "parameter25"
+    title: "25 Offset value for temperature"
+    description: "Calibrate temperature. Scale is defined by Param 64 .eg: Value 15 means 1.5°C or 1.5F."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum: 200
+      default: 0
+  - name: "parameter26"
+    title: "26 Offset value for Humidity"
+    description: "Calibrate humidity."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: -200
+      maximum: 200
+      default: 0
+  - name: "parameter27"
+    title: "27 Set tilt sensor mode"
+    description: "Set tilt sensor mode."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Disable"
+        1: "Enabled. Needs magnet"
+        2: "Enabled. It can used without magnet."
+      default: 1
+  - name: "parameter28"
+    title: "28 State of tilt in Mode 2"
+    description: "This parameter allows setting the state of door/window when the sensor is tilted."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Opened = tilted, closed = not tilted"
+        1: "Closed = tilted, opened = not tilted"
+      default: 0
+  - name: "parameter33"
+    title: "33 Tilt triggered angle"
+    description: "With this parameter, you can adjust the tilt triggered angle if the tilt is too low or too strong."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 1
+      maximum: 90
+      default: 5
+  - name: "parameter34"
+    title: "34 Timeout tilt detection Mode 1"
+    description: "Set the timeout of tilt detection Mode 1."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 5
+      maximum: 60
+      default: 5
+  - name: "parameter35"
+    title: "35 Timeout tilt detection Mode 2"
+    description: "Set the timeout of tilt detection Mode 2."
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 5
+      maximum: 60
+      default: 8
+  - name: "parameter36"
+    title: "36 Min. acc. change to report"
+    description: "Minimum acceleration change to trigger report"
+    required: false
+    preferenceType: integer
+    definition:
+      minimum: 0
+      maximum: 255
+      default: 0
+  - name: "parameter64"
+    title: "64 Temperature Scale"
+    description: "Scale for auto reports and settings."
+    required: false
+    preferenceType: enumeration
+    definition:
+      options:
+        0: "Celsius"
+        1: "Fahrenheit"