diff --git a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
index 619a42b5ef48..cc8ee1643167 100644
--- a/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
+++ b/arch/arm64/boot/dts/qcom/qcs6490-rb3gen2-industrial-mezzanine.dtso
@@ -8,6 +8,112 @@
 #include <dt-bindings/clock/qcom,gcc-sc7280.h>
 #include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
 
+/ {
+
+	hdmi-connector {
+		status = "disabled";
+	};
+
+	panel_lvds: panel-lvds@0 {
+		compatible = "panel-lvds";
+		data-mapping = "vesa-24";
+		width-mm = <476>;
+		height-mm = <268>;
+
+		status = "okay";
+
+		panel-timing {
+			clock-frequency = <148500000>;
+			hactive = <1920>;
+			vactive = <1080>;
+			hfront-porch = <88>;
+			hback-porch = <148>;
+			hsync-len = <44>;
+			vfront-porch = <4>;
+			vback-porch = <36>;
+			vsync-len = <5>;
+			de-active = <1>;
+		};
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				dual-lvds-odd-pixels;
+				panel_in_lvds_odd: endpoint {
+					remote-endpoint = <&lt9211c_out_odd>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+
+				dual-lvds-even-pixels;
+				panel_in_lvds_even: endpoint {
+					remote-endpoint = <&lt9211c_out_even>;
+				};
+
+			};
+		};
+	};
+
+};
+
+&i2c1 {
+	status = "okay";
+
+	lvds_bridge: lvds-bridge@29 {
+		compatible = "lontium,lt9211c";
+		reg = <0x29>;
+		reset-gpios = <&tlmm 117 1>;
+
+		status = "okay";
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+
+				lt9211c_in: endpoint {
+					data-lanes = <0 1 2 3>;
+					remote-endpoint = <&mdss_dsi0_out>;
+				};
+			};
+
+			port@2 {
+				reg = <2>;
+
+				lt9211c_out_odd: endpoint {
+					remote-endpoint = <&panel_in_lvds_odd>;
+				};
+			};
+
+			port@3 {
+				reg = <3>;
+
+				lt9211c_out_even: endpoint {
+					remote-endpoint = <&panel_in_lvds_even>;
+				};
+			};
+		};
+	};
+
+
+};
+
+&lt9611_codec {
+	status = "disabled";
+};
+
+&mdss_dsi0_out {
+	remote-endpoint = <&lt9211c_in>;
+};
+
 &spi11 {
 	#address-cells = <1>;
 	#size-cells = <0>;