init.lua

--[[

=====================================================================
==================== READ THIS BEFORE CONTINUING ====================
=====================================================================
========                                    .-----.          ========
========         .----------------------.   | === |          ========
========         |.-""""""""""""""""""-.|   |-----|          ========
========         ||                    ||   | === |          ========
========         ||   KICKSTART.NVIM   ||   |-----|          ========
========         ||                    ||   | === |          ========
========         ||                    ||   |-----|          ========
========         ||:Tutor              ||   |:::::|          ========
========         |'-..................-'|   |____o|          ========
========         `"")----------------(""`   ___________      ========
========        /::::::::::|  |::::::::::\  \ no mouse \     ========
========       /:::========|  |==hjkl==:::\  \ required \    ========
========      '""""""""""""'  '""""""""""""'  '""""""""""'   ========
========                                                     ========
=====================================================================
=====================================================================

What is Kickstart?

  Kickstart.nvim is *not* a distribution.

  Kickstart.nvim is a starting point for your own configuration.
    The goal is that you can read every line of code, top-to-bottom, understand
    what your configuration is doing, and modify it to suit your needs.

    Once you've done that, you can start exploring, configuring and tinkering to
    make Neovim your own! That might mean leaving kickstart just the way it is for a while
    or immediately breaking it into modular pieces. It's up to you!

    If you don't know anything about Lua, I recommend taking some time to read through
    a guide. One possible example which will only take 10-15 minutes:
      - https://learnxinyminutes.com/docs/lua/

    After understanding a bit more about Lua, you can use `:help lua-guide` as a
    reference for how Neovim integrates Lua.
    - :help lua-guide
    - (or HTML version): https://neovim.io/doc/user/lua-guide.html

Kickstart Guide:

  TODO: The very first thing you should do is to run the command `:Tutor` in Neovim.

    If you don't know what this means, type the following:
      - <escape key>
      - :
      - Tutor
      - <enter key>

    (If you already know how the Neovim basics, you can skip this step)

  Once you've completed that, you can continue working through **AND READING** the rest
  of the kickstart init.lua

  Next, run AND READ `:help`.
    This will open up a help window with some basic information
    about reading, navigating and searching the builtin help documentation.

    This should be the first place you go to look when you're stuck or confused
    with something. It's one of my favorite neovim features.

    MOST IMPORTANTLY, we provide a keymap "<space>sh" to [s]earch the [h]elp documentation,
    which is very useful when you're not sure exactly what you're looking for.

  I have left several `:help X` comments throughout the init.lua
    These are hints about where to find more information about the relevant settings,
    plugins or neovim features used in kickstart.

   NOTE: Look for lines like this

    Throughout the file. These are for you, the reader, to help understand what is happening.
    Feel free to delete them once you know what you're doing, but they should serve as a guide
    for when you are first encountering a few different constructs in your nvim config.

If you experience any errors while trying to install kickstart, run `:checkhealth` for more info

I hope you enjoy your Neovim journey,
- TJ

P.S. You can delete this when you're done too. It's your config now! :)
--]]

-- Set <space> as the leader key
-- See `:help mapleader`
--  NOTE: Must happen before plugins are loaded (otherwise wrong leader will be used)
vim.g.mapleader = ' '
vim.g.maplocalleader = ' '

vim.g.loaded_netrw = 1
vim.g.loaded_netrwPlugin = 1

-- Set to true if you have a Nerd Font installed
vim.g.have_nerd_font = true

-- 2 spaces is the best spaces.
vim.opt.tabstop = 2
vim.opt.expandtab = true

-- go away
vim.opt.swapfile = false

-- [[ Setting options ]]
-- See `:help vim.opt`
-- NOTE: You can change these options as you wish!
--  For more options, you can see `:help option-list`

-- Make line numbers default
vim.opt.number = true
-- You can also add relative line numbers, for help with jumping.
--  Experiment for yourself to see if you like it!
-- vim.opt.relativenumber = true

-- Enable mouse mode, can be useful for resizing splits for example!
vim.opt.mouse = 'a'

-- Don't show the mode, since it's already in status line
vim.opt.showmode = false

-- Sync clipboard between OS and Neovim.
--  Remove this option if you want your OS clipboard to remain independent.
--  See `:help 'clipboard'`
vim.opt.clipboard = 'unnamedplus'

-- Enable break indent
vim.opt.breakindent = true

-- Save undo history
vim.opt.undofile = true

-- Case-insensitive searching UNLESS \C or capital in search
vim.opt.ignorecase = true
vim.opt.smartcase = true

-- Keep signcolumn on by default
vim.opt.signcolumn = 'yes'

-- Decrease update time
vim.opt.updatetime = 250

-- Decrease mapped sequence wait time
-- Displays which-key popup sooner
vim.opt.timeoutlen = 300

vim.opt.wrap = false

-- Configure how new splits should be opened
vim.opt.splitright = true
vim.opt.splitbelow = true

-- Sets how neovim will display certain whitespace in the editor.
--  See `:help 'list'`
--  and `:help 'listchars'`
vim.opt.list = true
vim.opt.listchars = { tab = '» ', trail = '·', nbsp = '␣' }

-- Preview substitutions live, as you type!
vim.opt.inccommand = 'split'

-- Show which line your cursor is on
vim.opt.cursorline = true

-- Minimal number of screen lines to keep above and below the cursor.
vim.opt.scrolloff = 5

-- [[ Basic Keymaps ]]
--  See `:help vim.keymap.set()`

-- Set highlight on search, but clear on pressing <Esc> in normal mode
vim.opt.hlsearch = true
vim.keymap.set('n', '<Esc>', '<cmd>nohlsearch<CR>')

-- FIXME: Oh my god why can't this be lowercase
vim.api.nvim_create_user_command('Q', ':qa!', {})

-- Diagnostic keymaps
-- vim.keymap.set('n', '[d', vim.diagnostic.goto_prev, { desc = 'Go to previous [D]iagnostic message' })
-- vim.keymap.set('n', ']d', vim.diagnostic.goto_next, { desc = 'Go to next [D]iagnostic message' })
-- vim.keymap.set('n', '<leader>e', vim.diagnostic.open_float, { desc = 'Show diagnostic [E]rror messages' })
vim.keymap.set('n', '<leader>q', vim.diagnostic.setloclist, { desc = 'Open diagnostic [Q]uickfix list' })

-- Exit terminal mode in the builtin terminal with a shortcut that is a bit easier
-- for people to discover. Otherwise, you normally need to press <C-\><C-n>, which
-- is not what someone will guess without a bit more experience.
--
-- NOTE: This won't work in all terminal emulators/tmux/etc. Try your own mapping
-- or just use <C-\><C-n> to exit terminal mode
vim.keymap.set('t', '<Esc><Esc>', '<C-\\><C-n>', { desc = 'Exit terminal mode' })

-- TIP: Disable arrow keys in normal mode
-- vim.keymap.set('n', '<left>', '<cmd>echo "Use h to move!!"<CR>')
-- vim.keymap.set('n', '<right>', '<cmd>echo "Use l to move!!"<CR>')
-- vim.keymap.set('n', '<up>', '<cmd>echo "Use k to move!!"<CR>')
-- vim.keymap.set('n', '<down>', '<cmd>echo "Use j to move!!"<CR>')

-- Keybinds to make split navigation easier.
--  Use CTRL+<hjkl> to switch between windows
--
--  See `:help wincmd` for a list of all window commands
vim.keymap.set('n', '<C-h>', '<C-w><C-h>', { desc = 'Move focus to the left window' })
vim.keymap.set('n', '<C-l>', '<C-w><C-l>', { desc = 'Move focus to the right window' })
vim.keymap.set('n', '<C-j>', '<C-w><C-j>', { desc = 'Move focus to the lower window' })
vim.keymap.set('n', '<C-k>', '<C-w><C-k>', { desc = 'Move focus to the upper window' })

-- [[ Basic Autocommands ]]
--  See `:help lua-guide-autocommands`

-- Highlight when yanking (copying) text
--  Try it with `yap` in normal mode
--  See `:help vim.highlight.on_yank()`
vim.api.nvim_create_autocmd('TextYankPost', {
  desc = 'Highlight when yanking (copying) text',
  group = vim.api.nvim_create_augroup('kickstart-highlight-yank', { clear = true }),
  callback = function()
    vim.highlight.on_yank()
  end,
})

vim.api.nvim_create_autocmd({ 'BufRead', 'BufNewFile' }, {
  pattern = '*.rbr',
  callback = function()
    local buf = vim.api.nvim_get_current_buf()
    vim.api.nvim_set_option_value('filetype', 'rebar', { buf = buf })
  end,
})

vim.api.nvim_create_autocmd({ 'BufRead', 'BufNewFile' }, {
  pattern = '*/resources/assets/*.json',
  callback = function()
    local buf = vim.api.nvim_get_current_buf()
    vim.api.nvim_set_option_value('filetype', 'mc-model', { buf = buf })
  end,
})

vim.api.nvim_create_autocmd('FileType', {
  pattern = { 'mc-model' },
  callback = function()
    vim.lsp.start {
      name = 'mc-lsp',
      -- TODO
      cmd = {
        '/home/macmv/Desktop/programming/rust/mclsp/target/release/mc-lsp',
      },
    }
  end,
  group = vim.api.nvim_create_augroup('nvim-rebar', { clear = true }),
})

-- add fql support
vim.api.nvim_create_autocmd({ 'BufRead', 'BufNewFile' }, {
  pattern = '*.fql',
  callback = function()
    local buf = vim.api.nvim_get_current_buf()
    vim.api.nvim_set_option_value('filetype', 'fql', { buf = buf })
  end,
})

vim.api.nvim_create_autocmd({ 'BufRead', 'BufNewFile' }, {
  pattern = '*.fsl',
  callback = function()
    local buf = vim.api.nvim_get_current_buf()
    vim.api.nvim_set_option_value('filetype', 'fsl', { buf = buf })
  end,
})

vim.api.nvim_create_autocmd({ 'BufRead', 'BufNewFile' }, {
  pattern = '*.ll',
  callback = function()
    local buf = vim.api.nvim_get_current_buf()
    vim.api.nvim_set_option_value('filetype', 'llama', { buf = buf })
  end,
})

-- racket
vim.api.nvim_create_autocmd('FileType', {
  pattern = { 'racket' },
  callback = function()
    vim.lsp.start {
      name = 'racket-langserver',
      cmd = {
        'racket',
        '-l',
        'racket-langserver',
      },
    }
  end,
})

-- [[ Install `lazy.nvim` plugin manager ]]
--    See `:help lazy.nvim.txt` or https://github.com/folke/lazy.nvim for more info
local lazypath = vim.fn.stdpath 'data' .. '/lazy/lazy.nvim'
if not vim.loop.fs_stat(lazypath) then
  local lazyrepo = 'https://github.com/folke/lazy.nvim.git'
  vim.fn.system { 'git', 'clone', '--filter=blob:none', '--branch=stable', lazyrepo, lazypath }
end ---@diagnostic disable-next-line: undefined-field
vim.opt.rtp:prepend(lazypath)

-- [[ Configure and install plugins ]]
--
--  To check the current status of your plugins, run
--    :Lazy
--
--  You can press `?` in this menu for help. Use `:q` to close the window
--
--  To update plugins, you can run
--    :Lazy update
--
-- NOTE: Here is where you install your plugins.
require('lazy').setup({
  -- NOTE: Plugins can be added with a link (or for a github repo: 'owner/repo' link).
  'tpope/vim-sleuth', -- Detect tabstop and shiftwidth automatically
  -- {
  --   'ggandor/leap.nvim',
  --   config = function(self, opts)
  --     require('leap').create_default_mappings()
  --   end,
  -- },

  -- {
  --   'zbirenbaum/copilot.lua',
  --   config = function()
  --     require('copilot').setup {
  --       suggestion = {
  --         auto_trigger = true,
  --         keymap = {
  --           accept = '<C-l>',
  --           prev = '<C-k>',
  --           next = '<C-j>',
  --         },
  --       },
  --     }
  --   end,
  -- },

  {
    'Exafunction/windsurf.vim',
    event = 'BufEnter',
  },

  {
    'nvim-tree/nvim-tree.lua',
    version = '*',
    lazy = false,
    dependencies = {
      'nvim-tree/nvim-web-devicons',
    },
    config = function()
      local api1 = require 'nvim-tree.api'
      vim.keymap.set('n', '<leader>e', api1.tree.toggle, { desc = 'Toggle File Tree' })

      local function ntree_on_attach(bufnr)
        local api = require 'nvim-tree.api'
        local function opts(desc)
          return { desc = 'nvim-tree: ' .. desc, buffer = bufnr, noremap = true, silent = true, nowait = true }
        end

        -- default mappings
        api.config.mappings.default_on_attach(bufnr)
      end
      require('nvim-tree').setup {
        view = { adaptive_size = true },
        on_attach = ntree_on_attach,

        update_focused_file = {
          enable = true,
        },

        diagnostics = {
          enable = true,
        },
      }
    end,
  },

  -- NOTE: Plugins can also be added by using a table,
  -- with the first argument being the link and the following
  -- keys can be used to configure plugin behavior/loading/etc.
  --
  -- Use `opts = {}` to force a plugin to be loaded.
  --
  --  This is equivalent to:
  --    require('Comment').setup({})

  -- "gc" to comment visual regions/lines
  --
  { 'numToStr/Comment.nvim', opts = {} },
  -- Here is a more advanced example where we pass configuration
  -- options to `gitsigns.nvim`. This is equivalent to the following lua:
  --    require('gitsigns').setup({ ... })
  --
  -- See `:help gitsigns` to understand what the configuration keys do
  { -- Adds git related signs to the gutter, as well as utilities for managing changes
    'lewis6991/gitsigns.nvim',
    config = function()
      vim.keymap.set('n', '[c', function()
        -- HOLY SHIT STOP CHANGING YOUR APIS!!!
        require('gitsigns').nav_hunk('prev', { wrap = false })
      end)
      vim.keymap.set('n', ']c', function()
        require('gitsigns').nav_hunk('next', { wrap = false })
      end)

      require('gitsigns').setup {
        signs = {
          add = { text = '+' },
          change = { text = '~' },
          delete = { text = '_' },
          topdelete = { text = '‾' },
          changedelete = { text = '~' },
        },
        current_line_blame = true, -- Toggle with `:Gitsigns toggle_current_line_blame`
        current_line_blame_opts = {
          virt_text = true,
          virt_text_pos = 'right_align', -- 'eol' | 'overlay' | 'right_align'
          delay = 100,
          ignore_whitespace = false,
          virt_text_priority = 100,
          use_focus = true,
        },
      }
    end,
  },

  -- NOTE: Plugins can specify dependencies.
  --
  -- The dependencies are proper plugin specifications as well - anything
  -- you do for a plugin at the top level, you can do for a dependency.
  --
  -- Use the `dependencies` key to specify the dependencies of a particular plugin

  { -- Fuzzy Finder (files, lsp, etc)
    'nvim-telescope/telescope.nvim',
    event = 'VimEnter',
    branch = '0.1.x',
    dependencies = {
      'nvim-lua/plenary.nvim',
      { -- If encountering errors, see telescope-fzf-native README for install instructions
        'nvim-telescope/telescope-fzf-native.nvim',

        -- `build` is used to run some command when the plugin is installed/updated.
        -- This is only run then, not every time Neovim starts up.
        build = 'make',

        -- `cond` is a condition used to determine whether this plugin should be
        -- installed and loaded.
        cond = function()
          return vim.fn.executable 'make' == 1
        end,
      },
      { 'nvim-telescope/telescope-ui-select.nvim' },

      -- Useful for getting pretty icons, but requires a Nerd Font.
      { 'nvim-tree/nvim-web-devicons', enabled = vim.g.have_nerd_font },
    },
    config = function()
      -- Telescope is a fuzzy finder that comes with a lot of different things that
      -- it can fuzzy find! It's more than just a "file finder", it can search
      -- many different aspects of Neovim, your workspace, LSP, and more!
      --
      -- The easiest way to use telescope, is to start by doing something like:
      --  :Telescope help_tags
      --
      -- After running this command, a window will open up and you're able to
      -- type in the prompt window. You'll see a list of help_tags options and
      -- a corresponding preview of the help.
      --
      -- Two important keymaps to use while in telescope are:
      --  - Insert mode: <c-/>
      --  - Normal mode: ?
      --
      -- This opens a window that shows you all of the keymaps for the current
      -- telescope picker. This is really useful to discover what Telescope can
      -- do as well as how to actually do it!

      -- [[ Configure Telescope ]]
      -- See `:help telescope` and `:help telescope.setup()`
      require('telescope').setup {
        -- You can put your default mappings / updates / etc. in here
        --  All the info you're looking for is in `:help telescope.setup()`
        --
        -- defaults = {
        --   mappings = {
        --     i = { ['<c-enter>'] = 'to_fuzzy_refine' },
        --   },
        -- },
        -- pickers = {}
        defaults = {
          layout_strategy = 'horizontal',
          layout_config = { height = 0.95 },
        },
        extensions = {
          ['ui-select'] = {
            require('telescope.themes').get_dropdown(),
          },
        },
      }

      -- Enable telescope extensions, if they are installed
      pcall(require('telescope').load_extension, 'fzf')
      pcall(require('telescope').load_extension, 'ui-select')

      -- See `:help telescope.builtin`
      local builtin = require 'telescope.builtin'
      vim.keymap.set('n', '<leader>sf', builtin.find_files)
      vim.keymap.set('n', '<leader>st', builtin.treesitter)
      vim.keymap.set('n', '<leader>sd', builtin.lsp_workspace_symbols)
      -- vim.keymap.set('n', '<leader>sD', builtin.diagnostics)

      -- -- Slightly advanced example of overriding default behavior and theme
      -- vim.keymap.set('n', '<leader>/', function()
      --   -- You can pass additional configuration to telescope to change theme, layout, etc.
      --   builtin.current_buffer_fuzzy_find(require('telescope.themes').get_dropdown {
      --     winblend = 10,
      --     previewer = false,
      --   })
      -- end, { desc = '[/] Fuzzily search in current buffer' })
      --
      -- -- Also possible to pass additional configuration options.
      -- --  See `:help telescope.builtin.live_grep()` for information about particular keys
      -- vim.keymap.set('n', '<leader>s/', function()
      --   builtin.live_grep {
      --     grep_open_files = true,
      --     prompt_title = 'Live Grep in Open Files',
      --   }
      -- end, { desc = '[S]earch [/] in Open Files' })
      --
      -- -- Shortcut for searching your neovim configuration files
      -- vim.keymap.set('n', '<leader>sn', function()
      --   builtin.find_files { cwd = vim.fn.stdpath 'config' }
      -- end, { desc = '[S]earch [N]eovim files' })
    end,
  },

  -- LSP Plugins
  {
    -- `lazydev` configures Lua LSP for your Neovim config, runtime and plugins
    -- used for completion, annotations and signatures of Neovim apis
    'folke/lazydev.nvim',
    ft = 'lua',
    opts = {
      library = {
        -- Load luvit types when the `vim.uv` word is found
        { path = '${3rd}/luv/library', words = { 'vim%.uv' } },
      },
    },
  },
  { -- LSP Configuration & Plugins
    'neovim/nvim-lspconfig',
    dependencies = {
      -- Automatically install LSPs and related tools to stdpath for neovim
      { 'mason-org/mason.nvim', opts = {} },
      'mason-org/mason-lspconfig.nvim',
      'WhoIsSethDaniel/mason-tool-installer.nvim',

      -- Useful status updates for LSP.
      { 'j-hui/fidget.nvim', opts = {} },

      -- Allows extra capabilities provided by blink.cmp
      'saghen/blink.cmp',
    },
    config = function()
      -- If you're wondering about lsp vs treesitter, you can check out the wonderfully
      -- and elegantly composed help section, `:help lsp-vs-treesitter`

      --  This function gets run when an LSP attaches to a particular buffer.
      --    That is to say, every time a new file is opened that is associated with
      --    an lsp (for example, opening `main.rs` is associated with `rust_analyzer`) this
      --    function will be executed to configure the current buffer
      vim.api.nvim_create_autocmd('LspAttach', {
        group = vim.api.nvim_create_augroup('kickstart-lsp-attach', { clear = true }),
        callback = function(event)
          local map = function(keys, func, desc)
            vim.keymap.set('n', keys, func, { buffer = event.buf, desc = 'LSP: ' .. desc })
          end

          -- map('gd', require('telescope.builtin').lsp_definitions, '[G]oto [D]efinition')
          map('gd', vim.lsp.buf.definition, '[G]oto [D]efinition')

          map('gr', require('telescope.builtin').lsp_references, '[G]oto [R]eferences')
          -- TODO: vim.lsp.buf.references

          -- TODO:
          -- vim.keymap.set('n', 'gds', vim.lsp.buf.document_symbol)
          -- vim.keymap.set('n', 'gi', vim.lsp.buf.implementation)
          -- vim.keymap.set('n', 'gws', vim.lsp.buf.workspace_symbol)
          -- vim.keymap.set('n', '<leader>cl', vim.lsp.codelens.run)
          -- vim.keymap.set('n', '<leader>sh', vim.lsp.buf.signature_help)
          -- vim.keymap.set('n', '<leader>f', vim.lsp.buf.format)
          vim.keymap.set('n', '<leader>aa', vim.diagnostic.setqflist)

          -- TODO: all workspace errors
          -- vim.keymap.set('n', '<leader>ae', function()
          --   vim.diagnostic.setqflist { severity = 'E' }
          -- end)

          -- all workspace warnings
          -- vim.keymap.set('n', '<leader>aw', function()
          --   vim.diagnostic.setqflist { severity = 'W' }
          -- end)

          -- buffer diagnostics only
          -- vim.keymap.set('n', '<leader>d', vim.diagnostic.setloclist)

          -- Jump to the implementation of the word under your cursor.
          --  Useful when your language has ways of declaring types without an actual implementation.
          map('gI', require('telescope.builtin').lsp_implementations, '[G]oto [I]mplementation')

          -- Jump to the type of the word under your cursor.
          --  Useful when you're not sure what type a variable is and you want to see
          --  the definition of its *type*, not where it was *defined*.
          map('<leader>D', require('telescope.builtin').lsp_type_definitions, 'Type [D]efinition')

          -- Fuzzy find all the symbols in your current document.
          --  Symbols are things like variables, functions, types, etc.
          map('<leader>ds', require('telescope.builtin').lsp_document_symbols, '[D]ocument [S]ymbols')

          -- Fuzzy find all the symbols in your current workspace
          --  Similar to document symbols, except searches over your whole project.
          map('<leader>ws', require('telescope.builtin').lsp_dynamic_workspace_symbols, '[W]orkspace [S]ymbols')

          -- Rename the variable under your cursor
          --  Most Language Servers support renaming across files, etc.
          map('<leader>rn', vim.lsp.buf.rename, '[R]e[n]ame')

          -- Execute a code action, usually your cursor needs to be on top of an error
          -- or a suggestion from your LSP for this to activate.
          map('<leader>ca', vim.lsp.buf.code_action, '[C]ode [A]ction')

          -- Opens a popup that displays documentation about the word under your cursor
          --  See `:help K` for why this keymap
          map('K', vim.lsp.buf.hover, 'Hover Documentation')

          -- This is not Goto Definition, this is Goto Declaration.
          --  For example, in C this would take you to the header
          map('gD', vim.lsp.buf.declaration, '[G]oto [D]eclaration')

          map('[g', function()
            vim.diagnostic.jump { count = -1, float = true }
          end, 'Goto previous diagnostic')

          map(']g', function()
            vim.diagnostic.jump { count = 1, float = true }
          end, 'Goto next diagnostic')

          -- The following two autocommands are used to highlight references of the
          -- word under your cursor when your cursor rests there for a little while.
          --    See `:help CursorHold` for information about when this is executed
          --
          -- When you move your cursor, the highlights will be cleared (the second autocommand).
          local client = vim.lsp.get_client_by_id(event.data.client_id)
          if client and client.server_capabilities.documentHighlightProvider then
            vim.api.nvim_create_autocmd({ 'CursorHold', 'CursorHoldI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.document_highlight,
            })

            vim.api.nvim_create_autocmd({ 'CursorMoved', 'CursorMovedI' }, {
              buffer = event.buf,
              callback = vim.lsp.buf.clear_references,
            })
          end
        end,
      })

      local capabilities = vim.lsp.protocol.make_client_capabilities()
      capabilities = vim.tbl_deep_extend('force', capabilities, require('cmp_nvim_lsp').default_capabilities())

      vim.lsp.config('clangd', {})
      vim.lsp.config('gopls', {})
      vim.lsp.config('pyright', {})
      vim.lsp.config('lua_ls', {
        settings = {
          Lua = {
            completion = {
              callSnippet = 'Replace',
            },
            -- You can toggle below to ignore Lua_LS's noisy `missing-fields` warnings
            -- diagnostics = { disable = { 'missing-fields' } },
          },
        },
      })

      require('mason').setup()
      require('mason-tool-installer').setup {
        ensure_installed = {
          'clangd',
          'gopls',
          'pyright',
          'lua_ls',
          'stylua',
          'svelte-language-server',
          'tinymist',
        },
      }

      require('mason-lspconfig').setup {
        automatic_enable = {
          exclude = {
            'rust_analyzer',
          },
        },
        handlers = {
          function(server_name)
            local config = vim.lsp.config[server_name]
          end,
        },
      }

      vim.lsp.config('relsp', {
        capabilities = capabilities,
        filetypes = { 'rebar' },
        cmd = { '/home/macmv/Desktop/programming/rust/rebar/target/release/relsp' },
        root_dir = function(fname)
          local util = require 'lspconfig.util'
          return util.root_pattern '.git'(fname) or vim.fs.dirname(fname)
        end,
      })

      vim.lsp.config('dartls', {
        flags = {
          allow_incremental_sync = false,
        },
        on_attach = function(client, bufnr)
          client.server_capabilities.semanticTokensProvider = nil
        end,
        cmd = { 'dart', 'language-server', '--protocol=lsp' },
      })
    end,
  },

  { -- Autoformat
    'stevearc/conform.nvim',
    config = function()
      require('conform').setup {
        notify_on_error = false,
        formatters_by_ft = {
          lua = { 'stylua' },
          -- Conform can also run multiple formatters sequentially
          python = { 'isort', 'black' },
          typescript = { 'prettierd' },
          typescriptreact = { 'prettierd' },
          rebar = { 'rebar' },
          jsonnet = { 'jsonnetfmt' },
          terraform = { 'terraform' },
        },
        formatters = {
          jsonnetfmt = {
            command = 'jsonnetfmt',
            args = { '--string-style', 'd', '-' },
            stdin = true,
          },
          rebar = {
            command = '/home/macmv/Desktop/programming/rust/rebar/target/release/refmt',
            args = { '-' },
            stdin = true,
          },
          terraform = {
            command = 'terraform',
            args = { 'fmt', '-' },
            stdin = true,
          },
        },
      }

      -- FIXME: I'd like to use `vim.g.` here, but it doesn't seem to work.
      ConformOnSave = true

      vim.keymap.set('n', '<F5>', function()
        if ConformOnSave then
          ConformOnSave = false
          print 'Disabled format on save'
        else
          ConformOnSave = true
          print 'Enabled format on save'
        end
      end)

      vim.api.nvim_create_autocmd('BufWritePre', {
        pattern = '*',
        callback = function(args)
          if ConformOnSave then
            require('conform').format {
              bufnr = args.buf,
              timeout_ms = 500,
              lsp_fallback = true,
            }
          end
        end,
      })
    end,
  },

  { -- Autocompletion
    'hrsh7th/nvim-cmp',
    event = 'InsertEnter',
    dependencies = {
      -- Snippet Engine & its associated nvim-cmp source
      {
        'L3MON4D3/LuaSnip',
        build = (function()
          -- Build Step is needed for regex support in snippets
          -- This step is not supported in many windows environments
          -- Remove the below condition to re-enable on windows
          if vim.fn.has 'win32' == 1 or vim.fn.executable 'make' == 0 then
            return
          end
          return 'make install_jsregexp'
        end)(),
        dependencies = {
          -- `friendly-snippets` contains a variety of premade snippets.
          --    See the README about individual language/framework/plugin snippets:
          --    https://github.com/rafamadriz/friendly-snippets
          -- {
          --   'rafamadriz/friendly-snippets',
          --   config = function()
          --     require('luasnip.loaders.from_vscode').lazy_load()
          --   end,
          -- },
        },
      },
      'saadparwaiz1/cmp_luasnip',

      -- Adds other completion capabilities.
      --  nvim-cmp does not ship with all sources by default. They are split
      --  into multiple repos for maintenance purposes.
      'hrsh7th/cmp-nvim-lsp',
      'hrsh7th/cmp-path',
    },
    config = function()
      -- See `:help cmp`
      local cmp = require 'cmp'
      local luasnip = require 'luasnip'
      luasnip.config.setup {}

      cmp.setup {
        snippet = {
          expand = function(args)
            luasnip.lsp_expand(args.body)
          end,
        },
        completion = { completeopt = 'menu,menuone,noinsert' },

        -- For an understanding of why these mappings were
        -- chosen, you will need to read `:help ins-completion`
        --
        -- No, but seriously. Please read `:help ins-completion`, it is really good!
        mapping = cmp.mapping.preset.insert {
          -- Select the [n]ext item
          ['<C-n>'] = cmp.mapping.select_next_item(),
          -- Select the [p]revious item
          ['<C-p>'] = cmp.mapping.select_prev_item(),

          -- scroll the documentation window [b]ack / [f]orward
          ['<C-b>'] = cmp.mapping.scroll_docs(-4),
          ['<C-f>'] = cmp.mapping.scroll_docs(4),

          -- Accept ([y]es) the completion.
          --  This will auto-import if your LSP supports it.
          --  This will expand snippets if the LSP sent a snippet.
          ['<C-y>'] = cmp.mapping.confirm { select = true },
          ['<CR>'] = cmp.mapping.confirm { select = true },

          -- Manually trigger a completion from nvim-cmp.
          --  Generally you don't need this, because nvim-cmp will display
          --  completions whenever it has completion options available.
          ['<C-Space>'] = cmp.mapping.complete {},

          -- Think of <c-l> as moving to the right of your snippet expansion.
          --  So if you have a snippet that's like:
          --  function $name($args)
          --    $body
          --  end
          --
          -- <c-l> will move you to the right of each of the expansion locations.
          -- <c-h> is similar, except moving you backwards.
          -- ['<C-l>'] = cmp.mapping(function()
          --   if luasnip.expand_or_locally_jumpable() then
          --     luasnip.expand_or_jump()
          --   end
          -- end, { 'i', 's' }),
          -- ['<C-h>'] = cmp.mapping(function()
          --   if luasnip.locally_jumpable(-1) then
          --     luasnip.jump(-1)
          --   end
          -- end, { 'i', 's' }),

          -- For more advanced luasnip keymaps (e.g. selecting choice nodes, expansion) see:
          --    https://github.com/L3MON4D3/LuaSnip?tab=readme-ov-file#keymaps
        },
        sources = {
          { name = 'nvim_lsp' },
          { name = 'luasnip' },
          { name = 'path' },
        },
      }
    end,
  },

  { -- You can easily change to a different colorscheme.
    -- Change the name of the colorscheme plugin below, and then
    -- change the command in the config to whatever the name of that colorscheme is
    --
    -- If you want to see what colorschemes are already installed, you can use `:Telescope colorscheme`
    'catppuccin/nvim',
    priority = 1000, -- make sure to load this before all the other start plugins
    init = function()
      -- Load the colorscheme here.
      -- Like many other themes, this one has different styles, and you could load
      -- any other, such as 'tokyonight-storm', 'tokyonight-moon', or 'tokyonight-day'.
      vim.cmd.colorscheme 'catppuccin'

      -- You can configure highlights by doing something like
      vim.cmd.hi 'Comment gui=none'
    end,
  },

  {
    'rktjmp/lush.nvim',
  },

  -- Highlight todo, notes, etc in comments
  { 'folke/todo-comments.nvim', event = 'VimEnter', dependencies = { 'nvim-lua/plenary.nvim' }, opts = { signs = false } },

  { -- Collection of various small independent plugins/modules
    'echasnovski/mini.nvim',
    config = function()
      -- Better Around/Inside textobjects
      --
      -- Examples:
      --  - va)  - [V]isually select [A]round [)]paren
      --  - yinq - [Y]ank [I]nside [N]ext [']quote
      --  - ci'  - [C]hange [I]nside [']quote
      require('mini.ai').setup { n_lines = 500 }

      -- Add/delete/replace surroundings (brackets, quotes, etc.)
      --
      -- - saiw) - [S]urround [A]dd [I]nner [W]ord [)]Paren
      -- - sd'   - [S]urround [D]elete [']quotes
      -- - sr)'  - [S]urround [R]eplace [)] [']
      -- require('mini.surround').setup()

      -- Simple and easy statusline.
      --  You could remove this setup call if you don't like it,
      --  and try some other statusline plugin
      local statusline = require 'mini.statusline'
      -- set use_icons to true if you have a Nerd Font
      statusline.setup { use_icons = vim.g.have_nerd_font }

      -- You can configure sections in the statusline by overriding their
      -- default behavior. For example, here we set the section for
      -- cursor location to LINE:COLUMN
      ---@diagnostic disable-next-line: duplicate-set-field
      statusline.section_location = function()
        return '%2l:%-2v'
      end

      -- ... and there is more!
      --  Check out: https://github.com/echasnovski/mini.nvim
    end,
  },

  { -- Highlight, edit, and navigate code
    'nvim-treesitter/nvim-treesitter',
    build = ':TSUpdate',
    version = '0.10.0',
    opts = {
      ensure_installed = { 'bash', 'c', 'html', 'lua', 'markdown', 'vim', 'vimdoc' },
      -- Autoinstall languages that are not installed
      auto_install = true,
      highlight = {
        enable = true,
        -- Some languages depend on vim's regex highlighting system (such as Ruby) for indent rules.
        --  If you are experiencing weird indenting issues, add the language to
        --  the list of additional_vim_regex_highlighting and disabled languages for indent.
        additional_vim_regex_highlighting = { 'ruby' },
      },
      indent = { enable = true, disable = { 'ruby' } },
    },
    config = function(_, opts)
      -- [[ Configure Treesitter ]] See `:help nvim-treesitter`

      ---@diagnostic disable-next-line: missing-fields
      require('nvim-treesitter.configs').setup(opts)

      -- There are additional nvim-treesitter modules that you can use to interact
      -- with nvim-treesitter. You should go explore a few and see what interests you:
      --
      --    - Incremental selection: Included, see `:help nvim-treesitter-incremental-selection-mod`
      --    - Show your current context: https://github.com/nvim-treesitter/nvim-treesitter-context
      --    - Treesitter + textobjects: https://github.com/nvim-treesitter/nvim-treesitter-textobjects
    end,
  },
  {
    'NeogitOrg/neogit',
    dependencies = {
      'nvim-lua/plenary.nvim', -- required
      'sindrets/diffview.nvim', -- optional - Diff integration

      -- Only one of these is needed, not both.
      'nvim-telescope/telescope.nvim', -- optional
      'ibhagwan/fzf-lua', -- optional
    },
    config = true,
  },
  {
    'scalameta/nvim-metals',
    dependencies = {
      'nvim-lua/plenary.nvim',
      {
        'j-hui/fidget.nvim',
        opts = {},
      },
      {
        'mfussenegger/nvim-dap',
        config = function(self, opts)
          -- Debug settings if you're using nvim-dap
          local dap = require 'dap'

          dap.configurations.scala = {
            {
              type = 'scala',
              request = 'launch',
              name = 'RunOrTest',
              metals = {
                runType = 'runOrTestFile',
                --args = { "firstArg", "secondArg", "thirdArg" }, -- here just as an example
              },
            },
            {
              type = 'scala',
              request = 'launch',
              name = 'Test Target',
              metals = {
                runType = 'testTarget',
              },
            },
          }
        end,
      },
    },
    ft = { 'scala', 'sbt' },
    opts = function()
      local metals_config = require('metals').bare_config()

      -- Example of settings
      metals_config.settings = {
        showImplicitArguments = true,
        excludedPackages = { 'akka.actor.typed.javadsl', 'com.github.swagger.akka.javadsl' },
      }

      local current_buffer = vim.api.nvim_buf_get_name(0)
      local depth = 1
      if current_buffer:match '^/home/macmv/Desktop/programming/fauna/core.*' then
        depth = 2
      end
      metals_config.find_root_dir_max_project_nesting = depth

      -- *READ THIS*
      -- I *highly* recommend setting statusBarProvider to either "off" or "on"
      --
      -- "off" will enable LSP progress notifications by Metals and you'll need
      -- to ensure you have a plugin like fidget.nvim installed to handle them.
      --
      -- "on" will enable the custom Metals status extension and you *have* to have
      -- a have settings to capture this in your statusline or else you'll not see
      -- any messages from metals. There is more info in the help docs about this
      metals_config.init_options.statusBarProvider = 'off'

      -- Example if you are using cmp how to make sure the correct capabilities for snippets are set
      metals_config.capabilities = require('cmp_nvim_lsp').default_capabilities()

      metals_config.on_attach = function(client, bufnr)
        require('metals').setup_dap()

        -- metals mappings
        vim.keymap.set('n', '<leader>ws', function()
          require('metals').hover_worksheet()
        end)

        -- Example vim.keymap.setpings for usage with nvim-dap. If you don't use that, you can
        -- skip these
        vim.keymap.set('n', '<leader>dc', function()
          require('dap').continue()
        end)

        vim.keymap.set('n', '<leader>dr', function()
          require('dap').repl.toggle()
        end)

        vim.keymap.set('n', '<leader>dK', function()
          require('dap.ui.widgets').hover()
        end)

        vim.keymap.set('n', '<leader>dt', function()
          require('dap').toggle_breakpoint()
        end)

        vim.keymap.set('n', '<leader>dso', function()
          require('dap').step_over()
        end)

        vim.keymap.set('n', '<leader>dsi', function()
          require('dap').step_into()
        end)

        vim.keymap.set('n', '<leader>dl', function()
          require('dap').run_last()
        end)
      end

      return metals_config
    end,
    config = function(self, metals_config)
      local nvim_metals_group = vim.api.nvim_create_augroup('nvim-metals', { clear = true })
      vim.api.nvim_create_autocmd('FileType', {
        pattern = self.ft,
        callback = function()
          require('metals').initialize_or_attach(metals_config)
        end,
        group = nvim_metals_group,
      })
    end,
  },

  {
    'HiPhish/rainbow-delimiters.nvim',
    opts = {
      strategy = {
        [''] = 'rainbow-delimiters.strategy.global',
        vim = 'rainbow-delimiters.strategy.local',
      },
      query = {
        [''] = 'rainbow-delimiters',
        lua = 'rainbow-blocks',
      },
      priority = {
        [''] = 110,
        lua = 210,
      },
      highlight = {
        'RainbowDelimiterRedDim',
        'RainbowDelimiterOrangeDim',
        'RainbowDelimiterYellowDim',
        'RainbowDelimiterGreenDim',
        'RainbowDelimiterCyanDim',
        'RainbowDelimiterBlueDim',
        'RainbowDelimiterVioletDim',
      },
    },
    config = function(_, opts)
      local function hl(name, color)
        vim.api.nvim_set_hl(0, name, { fg = color, bg = 'NONE' })
      end

      hl('RainbowDelimiterRedDim', '#af9198')
      hl('RainbowDelimiterOrangeDim', '#ae9485')
      hl('RainbowDelimiterYellowDim', '#a49980')
      hl('RainbowDelimiterGreenDim', '#8da18b')
      hl('RainbowDelimiterCyanDim', '#81a29c')
      hl('RainbowDelimiterBlueDim', '#8d9bb2')
      hl('RainbowDelimiterVioletDim', '#9f95ad')

      require('rainbow-delimiters.setup').setup(opts)
    end,
  },

  -- {
  --   'nvim-java/nvim-java',
  --   config = function()
  --     require('java').setup()
  --   end,
  -- },

  {
    'mrcjkb/rustaceanvim',
    lazy = false, -- This is already lazy
    init = function()
      vim.g.rustaceanvim = {
        tools = {},
        server = {
          on_attach = function(client, bufnr)
            -- you can also put keymaps in here

            -- TODO
            -- local path = vim.fn.getcwd() .. '/.rust-analyzer.lua'
            -- local file = io.open(path, 'r')
            -- if file ~= nil then
            --   file:close()

            --   config.settings = { ['rust-analyzer'] = loadfile(path)() }
            -- end
          end,
          default_settings = {
            ['rust-analyzer'] = {
              check = {
                command = 'check',
              },
              diagnostics = {
                disabled = { 'inactive-code' },
              },
            },
          },
        },
        dap = {},
      }
    end,
  },

  {
    'chomosuke/typst-preview.nvim',
    ft = 'typst',
    version = '1.*',
    opts = {}, -- lazy.nvim will implicitly calls `setup {}`
  },

  -- The following two comments only work if you have downloaded the kickstart repo, not just copy pasted the
  -- init.lua. If you want these files, they are in the repository, so you can just download them and
  -- put them in the right spots if you want.

  -- NOTE: Next step on your Neovim journey: Add/Configure additional plugins for kickstart
  --
  --  Here are some example plugins that I've included in the kickstart repository.
  --  Uncomment any of the lines below to enable them (you will need to restart nvim).
  --
  -- require 'kickstart.plugins.debug',
  -- require 'kickstart.plugins.indent_line',

  -- NOTE: The import below can automatically add your own plugins, configuration, etc from `lua/custom/plugins/*.lua`
  --    This is the easiest way to modularize your config.
  --
  --  Uncomment the following line and add your plugins to `lua/custom/plugins/*.lua` to get going.
  --    For additional information, see `:help lazy.nvim-lazy.nvim-structuring-your-plugins`
  -- { import = 'custom.plugins' },
}, {
  ui = {
    -- If you have a Nerd Font, set icons to an empty table which will use the
    -- default lazy.nvim defined Nerd Font icons otherwise define a unicode icons table
    icons = vim.g.have_nerd_font and {} or {
      cmd = '⌘',
      config = '🛠',
      event = '📅',
      ft = '📂',
      init = '⚙',
      keys = '🗝',
      plugin = '🔌',
      runtime = '💻',
      require = '🌙',
      source = '📄',
      start = '🚀',
      task = '📌',
      lazy = '💤 ',
    },
  },
})

vim.api.nvim_create_autocmd('BufRead', {
  pattern = { '*.mdx' },
  callback = function()
    vim.bo.filetype = 'markdown'
  end,
})

vim.api.nvim_create_autocmd('BufRead', {
  pattern = { '*.s' },
  callback = function()
    vim.bo.filetype = 'asm6502'
  end,
})

vim.api.nvim_create_autocmd('BufRead', {
  pattern = { '*.nc' },
  callback = function()
    vim.bo.filetype = 'nesc'
  end,
})

vim.api.nvim_create_autocmd('BufRead', {
  pattern = { '*.bdb' },
  callback = function()
    vim.bo.filetype = 'bluedb'
  end,
})

vim.api.nvim_create_autocmd('FileType', {
  pattern = { 'bluedb' },
  callback = function()
    vim.lsp.start {
      name = 'blue-lsp',
      -- TODO
      cmd = {
        '/home/macmv/Desktop/programming/rust/blue-metrics/database/target/debug/blue-lsp',
      },
    }
  end,
  group = vim.api.nvim_create_augroup('nvim-blue-lsp', { clear = true }),
})

-- The line beneath this is called `modeline`. See `:help modeline`
-- vim: ts=2 sts=2 sw=2 et