Image yocto not found

[dl8sd11]

The image does not exist on downloads.yoctoproject.org. Neither does https://mirrors.kernel.org/yocto/yocto/ exist.

$ make boot   
wget http://downloads.yoctoproject.org/releases/yocto/yocto-2.3/machines/qemu/qemux86//core-image-minimal-qemux86.ext4
--2024-11-16 17:48:19--  http://downloads.yoctoproject.org/releases/yocto/yocto-2.3/machines/qemu/qemux86//core-image-minimal-qemux86.ext4
Resolving downloads.yoctoproject.org (downloads.yoctoproject.org)... 37.27.135.249, 2a01:4f9:3070:3985::2
Connecting to downloads.yoctoproject.org (downloads.yoctoproject.org)|37.27.135.249|:80... connected.
HTTP request sent, awaiting response... 404 Not Found
2024-11-16 17:48:20 ERROR 404: Not Found.

make: *** [qemu/Makefile:63: core-image-minimal-qemux86.ext4] Error 8

Is there another mirror or copy of the image? Thanks!

[fresheed]

I've changed Yocto parameters in tools/labs/qemu/Makefile as follows:

YOCTO_BASE=https://downloads.yoctoproject.org/releases/yocto/milestones/yocto-5.1_M3
YOCTO_URL=$(YOCTO_BASE)/machines/qemu/qemu$(ARCH)/
YOCTO_IMAGE=core-image-minimal-qemux86.rootfs-20240901114018.ext4

[qlibp]

Have you encounter this problem? I failed to setup loop device.

root@ubuntu20:/linux/tools/labs# make boot
mkdir /tmp/tmp.NXSxdjS8gJ
sudo mount -t ext4 -o loop core-image-minimal-qemux86.rootfs-20240901114018.ext4 /tmp/tmp.NXSxdjS8gJ
mount: /tmp/tmp.NXSxdjS8gJ: failed to setup loop device for /linux/tools/labs/core-image-minimal-qemux86.rootfs-20240901114018.ext4.
make: *** [qemu/Makefile:57: .modinst] Error 32

[dbaluta]

Have you encounter this problem? I failed to setup loop device.

root@ubuntu20:/linux/tools/labs# make boot
mkdir /tmp/tmp.NXSxdjS8gJ
sudo mount -t ext4 -o loop core-image-minimal-qemux86.rootfs-20240901114018.ext4 /tmp/tmp.NXSxdjS8gJ
mount: /tmp/tmp.NXSxdjS8gJ: failed to setup loop device for /linux/tools/labs/core-image-minimal-qemux86.rootfs-20240901114018.ext4.
make: *** [qemu/Makefile:57: .modinst] Error 32

Same happens after a fresh reboot?

[qlibp]

Have you encounter this problem? I failed to setup loop device.

root@ubuntu20:/linux/tools/labs# make boot
mkdir /tmp/tmp.NXSxdjS8gJ
sudo mount -t ext4 -o loop core-image-minimal-qemux86.rootfs-20240901114018.ext4 /tmp/tmp.NXSxdjS8gJ
mount: /tmp/tmp.NXSxdjS8gJ: failed to setup loop device for /linux/tools/labs/core-image-minimal-qemux86.rootfs-20240901114018.ext4.
make: *** [qemu/Makefile:57: .modinst] Error 32

Same happens after a fresh reboot?

after reboot the system, it seems working. But I don't know if it's correctly booted up. I use minicom -D serial.pts to connect, but I can't log in to the booted vm.

[dbaluta]

If you don't have any virt accelerator enabled (e.g kvm) then the boot should take around 1 minute.

I think you can run something like this KVM=yes ; make boot

[qlibp]

If you don't have any virt accelerator enabled (e.g kvm) then the boot should take around 1 minute.

I think you can run something like this KVM=yes ; make boot

Thanks for your reply. I try launching using KVM=yes ; make boot and wait for around 3mins, but still minicom shows nothing. I suspect this is because the arbritary env I set to DISPLAY=0?

[markus-zhang]

I know this was already answered, but here is a slightly different version that works:
open file /linux/tools/labs/qemu/Makefile, and modify YOCTO_URL to:

YOCTO_URL = http://downloads.yoctoproject.org/releases/yocto/yocto-4.0/machines/qemu/qemu$(ARCH)/