Can't boot Debian Trixie on Orange Pi 5 Plus

[tienli]

SBC is OPi5+

Followed instruction using
zcat boot-orangepi_5_plus.bin.gz+debian-trixie-arm64-ej4pho.bin.gz > debian-trixie.img
Write with BalenaEtcher to micro SD card. (pv dd as well) Not booting up. In about 10 seconds, red LED turned green once for 0.1 second and back to red then stop there.

Used fdisk -l
fdisk -l /dev/sdf
and found out that boot partition was default on partition 2.
Changed it to boot from partition 2 to 1. This time it boot up, but not in SD card. It boot up , but continued into the NVMe system drive.
Don't know why partition 1 is FAT32. When put in Windows, it's unreadable. Something wrong?

[tienli]

Well, actually it boot.
But, two HDMI outputs do not work. Even the LEDs stayed no change. It looked like all dead until I tried ssh to it, and found out it'd boot up already. Crossing my fingers how I can turn on normal HDMI output.
Is there anything like orangepi-config/armbian-config utility to use?