Miner conf

[supernoveau]

I'm trying to pick up the miners on my local network (Antminer Z9 and Innosilicon ZMaster).

I updated the miners.conf with the IPs of the machine however when I run fcmsimple the new conf isn't picked up by the system (it shows 1 new machine only plus a S9105 that I haven't configured in the conf.

How do I reset the cache?

What is the clientid, networkid and minerid in the conf? I have these empty.

Will the system pick up miners on port 22, 80 or another port? Z9s are only open on 22 and 80 by default, ZMasters are also open by default on 8001.

[supernoveau]

I found fcmpurge which allows it to pick up my conf.

Calling fcmsimple I get:
Failed to call miner stats api: Expecting value: line 1 column 1 (char0).

Any help regarding the port and miner.conf would be a real help. Thanks

[dfoderick]

S9105 is my test machine. It is just a friendly name.
clientid, networkid, and minerid can be blank. I will write up some help documents for those values.

The port in miner.conf should be the miner api port. Usually 4028 by default.
I will check what the setting should be for Z9.

[dfoderick]

It looks like I have some work to do to automatically configure Innosilicon Zmaster. I will work on that soon.

Please try to enable api on the zmaster using the instructions at the bottom of the following page.
https://support.awesomeminer.com/support/solutions/articles/35000085990-configure-api-access-for-innosilicon-asic-miners

Note: I do not suggest allowing W:0/0 like the example shows, but try it first to get it to work and then try a setting that is more secure.

[supernoveau]

On the ZMaster I can enable that API following that guide, however I can't access the cgminer API.

Running netstat -l on the miner I see a process listening on 0.0.0.0:4028. However, when I use nmap to the IP, only port 22, 80 and 8001 are open. Running fcmsimple I get [Errno 111] Connection refused.

Do you know how I open port 4028 on the miner?

[supernoveau]

Sending to the cgminer API echo '{"command":"stats"}' | nc x.x.x.x 4028 I get the response {"STATUS":[{"STATUS":"S" .... so it seems this is working at the cgminer end?

[supernoveau]

I presume this is an unrestricted API call.

I removed the api-allow key in /config/cgminer.conf so there can't be a conflict with the systemctl init, and it may have enabled it.

Running fcmsimple then gives

1 api calls in 13ms
[stacktrace]
ZeroDivisionError: division by zero

[supernoveau]

To confirm, I used the API directly and I do have privileged access enabled, so the fcmsimple isn't working if I'm not mistaken?

Request:
echo '{"command":"privileged"}' | nc xx.xx.xx.xx 4028 >> ~/Desktop/output.txt

Response:

{"STATUS":[{"STATUS":"S","When":1542018669,"Code":46,"Msg":"Privileged access OK","Description":"sgminer 4.4.2"}],"id":1}�

[dfoderick]

I presume this is an unrestricted API call.

I removed the api-allow key in /config/cgminer.conf so there can't be a conflict with the systemctl init, and it may have enabled it.

Running fcmsimple then gives

1 api calls in 13ms
[stacktrace]
ZeroDivisionError: division by zero

Thank you for your help to diagnose this!

There must be a programming error on my side that is doing a division by zero. I will check the code.
In the mean time, does the stack trace tell you the line number for the ZeroDivisionError?
Or, if you can send me you output of the stats command then I can parse it to debug.

[dfoderick]

Sending to the cgminer API echo '{"command":"stats"}' | nc x.x.x.x 4028 I get the response {"STATUS":[{"STATUS":"S" .... so it seems this is working at the cgminer end?

Can you send me the full contents of the output of stats command?
There must be some contents that I have not encountered before and it is throwing an error in my programming.

[supernoveau]

This is the full response to the stats command - https://gist.github.com/almccann/a44351ec8bafc17ab000a8a70c575d24

[supernoveau]

So to help with debug, with cgminer API configured with privileged access (according to response above), fcmsimple full stack trace is:

Starting...
2018-11-13 09:54:43: Starting FCM Init
2018-11-13 09:54:43: Starting FCM Configuration
Starting FCM Cache
2018-11-13 09:54:43: started app. getting known miners
2018-11-13 09:54:43: 1 miners configured
Failed to call miner stats api: 'Description'
Traceback (most recent call last):
  File "/home/pi/fullcycle/fullcyclepy/helpers/antminerhelper.py", line 56, in stats
    minerinfo = parse_minerinfo(status)
  File "/home/pi/fullcycle/fullcyclepy/helpers/antminerhelper.py", line 124, in parse_minerinfo
    if status['Description'].startswith('cgminer'):
KeyError: 'Description'

During handling of the above exception, another exception occurred:

Traceback (most recent call last):
  File "/home/pi/fullcycle/fullcyclepy/backend/simplemonitor.py", line 113, in <module>
    LOOP.run_until_complete(run_tasks(CUTOR, MINERS))
  File "/usr/lib/python3.5/asyncio/base_events.py", line 466, in run_until_complete
    return future.result()
  File "/usr/lib/python3.5/asyncio/futures.py", line 293, in result
    raise self._exception
  File "/usr/lib/python3.5/asyncio/tasks.py", line 239, in _step
    result = coro.send(None)
  File "/home/pi/fullcycle/fullcyclepy/backend/simplemonitor.py", line 94, in run_tasks
    results = await fut
  File "/usr/lib/python3.5/asyncio/tasks.py", line 500, in _wait_for_one
    return f.result()  # May raise f.exception().
  File "/usr/lib/python3.5/asyncio/futures.py", line 293, in result
    raise self._exception
  File "/usr/lib/python3.5/concurrent/futures/thread.py", line 55, in run
    result = self.fn(*self.args, **self.kwargs)
  File "/home/pi/fullcycle/fullcyclepy/backend/simplemonitor.py", line 21, in getstats
    minerstats, minerinfo, statspolling, minerpool = antminerhelper.stats(miner)
  File "/home/pi/fullcycle/fullcyclepy/helpers/antminerhelper.py", line 65, in stats
    raise MinerMonitorException(ex)
helpers.antminerhelper.MinerMonitorException: 'Description'

[supernoveau]

1. Should be status = jstats['STATUS'][0]?
   

   fullcycle/fullcyclepy/helpers/antminerhelper.py

   Line 52 in 35f5d79

   status = jstats['STATS'][0]

2. With that change no miner_count, GHS 5s, GHS av, frequency nor controllertemps in this json. Have commented out this lines in my local version.
   

   fullcycle/fullcyclepy/helpers/antminerhelper.py

   Line 69 in 35f5d79

   entity.minercount = int(jsonstats['miner_count'])

3. Change to list index and sgminer if status[0]['Description'].startswith('sgminer'):?
   

   fullcycle/fullcyclepy/helpers/antminerhelper.py

   Line 124 in 35f5d79

   if status['Description'].startswith('cgminer'):

---

With these amendments fcmsimple returns:

Starting...
2018-11-13 17:19:39: Starting FCM Init
2018-11-13 17:19:39: Starting FCM Configuration
Starting FCM Cache
2018-11-13 17:19:39: started app. getting known miners
2018-11-13 17:19:39: 1 miners configured
zmaster1 mining at Antpool ZCash 8899
2018-11-13 17:19:40 zmaster1 offline 0 0 temp=0 0d2h47m 1054ms
1 api calls in 1072ms. Avg=1072.0ms
Concurrency saved 1054.8569099996712ms - 1072ms = -17.14309000032881ms (-1%)
Shutting down fcm app...

[dfoderick]

You're almost there. The temps need to be parsed correctly.
I will work on a pull request today.

[dfoderick]

This is the full response to the stats command - https://gist.github.com/almccann/a44351ec8bafc17ab000a8a70c575d24

These stats are quite a bit different than what i have seen before.
Basically, I need to get hash from 'MHS av'
and temp from 'Temp'

If I can pull those out then you can get basic monitoring and run rules on them.