Getting encrypted data using openssl certificate from MQTT client to MQTT server

[archunan007]

Hi All,
I have created and configured MQTT server and enabled web sockets as mentioned in this page.
Its successfully running and able to get the data from mqtt server.
But issue is, I have created some SSL certificate and used in my conf file(mosquitto.conf). but its throwing unknown error.
Please find some screenshot.


Can you please anyone let me know how to use openssl certificate to send data through encrypted way.

FYI
i refered a link (https://mcuoneclipse.com/2017/04/14/enable-secure-communication-with-tls-and-the-mosquitto-broker/). its works fine if the MQTT server is downloaded from the eclipse i.e., setup file(mosquitto_cygen).
But its wont work in this library.

please respond me ASAP.
Many thanks,
Archunan K.

[bapowell]

Archunan, Off the top of my head I'm not sure why you're seeing this problem. In my github wiki notes there is this comment:    "Note that you might actually need the full OpenSSL install to compile with TLS support." Have you tried building mosquitto using the full OpenSSL? Brad On Thursday, May 18, 2017 8:29 AM, archunan007 <notifications@github.com> wrote: Hi All, I have created and configured MQTT server and enabled web sockets as mentioned in this page. Its successfully running and able to get the data from mqtt server. But issue is, I have created some SSL certificate and used in my conf file(mosquitto.conf). but its throwing unknown error. Please find some screenshot. Can you please anyone let me know how to use openssl certificate to send data through encrypted way.FYI i refered a link (https://mcuoneclipse.com/2017/04/14/enable-secure-communication-with-tls-and-the-mosquitto-broker/). its works fine if the MQTT server is downloaded from the eclipse i.e., setup file(mosquitto_cygen). But its wont work in this library. please respond me ASAP. Many thanks, Archunan K.— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread.

[archunan007]

yes Brad, I have installed full openSSL only. Can you please explain the steps to enable OpenSSL with our library incase if i have done anything wrong. Thanks a lot and regards, Archunan.

…

On Fri, May 19, 2017 at 9:20 PM, bapowell ***@***.***> wrote: Archunan, Off the top of my head I'm not sure why you're seeing this problem. In my github wiki notes there is this comment: "Note that you might actually need the full OpenSSL install to compile with TLS support." Have you tried building mosquitto using the full OpenSSL? Brad On Thursday, May 18, 2017 8:29 AM, archunan007 ***@***.***> wrote: Hi All, I have created and configured MQTT server and enabled web sockets as mentioned in this page. Its successfully running and able to get the data from mqtt server. But issue is, I have created some SSL certificate and used in my conf file(mosquitto.conf). but its throwing unknown error. Please find some screenshot. Can you please anyone let me know how to use openssl certificate to send data through encrypted way.FYI i refered a link (https://mcuoneclipse.com/2017/04/14/enable-secure- communication-with-tls-and-the-mosquitto-broker/). its works fine if the MQTT server is downloaded from the eclipse i.e., setup file(mosquitto_cygen). But its wont work in this library. please respond me ASAP. Many thanks, Archunan K.— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub, or mute the thread. — You are receiving this because you authored the thread. Reply to this email directly, view it on GitHub <#1 (comment)>, or mute the thread <https://github.com/notifications/unsubscribe-auth/AYJcc2bg_mlYWUx2PIkGQqwBAwp67FVfks5r7bpYgaJpZM4NfOdD> .

-- Thanks & Regards, Archunan.K