Feather V2 New Device Setup #856
Description
A forum user reported issues getting WipperSnapper installed with the Feather V2. I was able to confirm that step #4 of installing WipperSnapper using WebSerial gets stuck and does not find the Feather V2. The guide page worked fine with other Feather ESP32-S3 variants.
error message from WipperSnapper WebSerial Step#4 ( EsptoolJS ) :
Oops! We've misplaced the connection resource, refresh your browser before trying again.
failes with current chrome and opera.
Chrome is up to date
Version 143.0.7499.170 (Official Build) (arm64)
Grabbing the WipperSnapper.bin file and manually installing with esptool.py via CLI or the other Adafruit WebSerial ESPTool works with the Feather V2. So good news that users have a manual work around to get the Feather V2 up.
successful esptool.py
sklarm@grazie Downloads % esptool.py --port /dev/cu.usbserial-56470250591 write_flash 0x0 wippersnapper.feather-esp32-v2.1.0.0-beta.121.bin
esptool.py v4.8.1
Serial port /dev/cu.usbserial-56470250591
Connecting....
Detecting chip type... Unsupported detection protocol, switching and trying again...
Connecting.....
Detecting chip type... ESP32
Chip is ESP32-PICO-V3-02 (revision v3.0)
Features: WiFi, BT, Dual Core, 240MHz, Embedded Flash, Embedded PSRAM, VRef calibration in efuse, Coding Scheme None
Crystal is 40MHz
MAC: e8:9f:6d:31:9e:54
Uploading stub...
Running stub...
Stub running...
Configuring flash size...
Flash will be erased from 0x00000000 to 0x007effff...
Compressed 8323072 bytes to 933263...
Wrote 8323072 bytes (933263 compressed) at 0x00000000 in 109.5 seconds (effective 608.3 kbit/s)...
Hash of data verified.
Leaving...
Hard resetting via RTS pin...
Successful Adafruit WebSerial ESPTool :
