diff --git a/drivers/Unofficial/tuya-zigbee/profiles/window-treatment-reverse.yml b/drivers/Unofficial/tuya-zigbee/profiles/window-treatment-reverse.yml
index 9712eb6849..d0f47cdafd 100644
--- a/drivers/Unofficial/tuya-zigbee/profiles/window-treatment-reverse.yml
+++ b/drivers/Unofficial/tuya-zigbee/profiles/window-treatment-reverse.yml
@@ -6,6 +6,8 @@ components:
     version: 1
   - id: windowShadeLevel
     version: 1
+  - id: statelessWindowShadeLevelStep
+    version: 1
   - id: windowShadePreset
     version: 1
   - id: firmwareUpdate
diff --git a/drivers/Unofficial/tuya-zigbee/src/curtain/init.lua b/drivers/Unofficial/tuya-zigbee/src/curtain/init.lua
index 03c34cac65..2a24269dd1 100644
--- a/drivers/Unofficial/tuya-zigbee/src/curtain/init.lua
+++ b/drivers/Unofficial/tuya-zigbee/src/curtain/init.lua
@@ -23,6 +23,14 @@ local packet_id = 0
 local PRESET_LEVEL = 50
 local PRESET_LEVEL_KEY = "_presetLevel"
 
+-- When the curtain is moving, LATEST_TARGET_LEVEL is used to store the latest target position value, 
+-- which will be cleared after 3 seconds timeout
+local LATEST_TARGET_LEVEL = "_latestTargetLevel"
+-- Field name for the timer that clears the target position after timeout
+local TARGET_LEVEL_TIME_OUT = "_targetLevelTimeOut"
+-- Timeout for the stateless step to accumulate
+local TARGET_LEVEL_TIME_OUT_SECONDS = 3
+
 local FINGERPRINTS = {
   { mfr = "_TZE284_nladmfvf", model = "TS0601"}
 }
@@ -153,6 +161,36 @@ local function tuya_cluster_handler(driver, device, zb_rx)
   end
 end
 
+local function handle_step_shade_level(driver, device, command)
+  local step = command.args.stepSize or command.args[1] or (command.positional_args and command.positional_args.stepSize)
+  
+  -- When LATEST_TARGET_LEVEL is empty, it means the curtain motor is not moving,
+  -- and capabilities.windowShadeLevel.shadeLevel is used as the reference for position offset calculation;
+  -- when LATEST_TARGET_LEVEL is not empty, it means the curtain motor is moving,
+  -- and LATEST_TARGET_LEVEL is used as the reference for position offset calculation to obtain a more accurate position calculation.
+  local latest_target_level = device:get_field(LATEST_TARGET_LEVEL)
+  local current_level = latest_target_level or
+    device:get_latest_state("main", capabilities.windowShadeLevel.ID,
+      capabilities.windowShadeLevel.shadeLevel.NAME) or 0
+
+  local target_level = utils.clamp_value(current_level + step, 0, 100)
+  target_level = utils.round(target_level)
+  -- Cancel any previous timer and set a 3 second timeout timer to ensure target_level is cleared
+  -- This is to prevent the stateless step from accumulating indefinitely, while ensuring that a single
+  -- "scroll" action can accumulate multiple steps within a short time frame
+  if device:get_field(TARGET_LEVEL_TIME_OUT) then
+    device.thread:cancel_timer(device:get_field(TARGET_LEVEL_TIME_OUT))
+  end
+  local timer = device.thread:call_with_delay(TARGET_LEVEL_TIME_OUT_SECONDS, function(d)
+    device:set_field(LATEST_TARGET_LEVEL, nil)
+  end)
+  device:set_field(TARGET_LEVEL_TIME_OUT, timer)
+  device:set_field(LATEST_TARGET_LEVEL, target_level)
+
+  local new_command = { args = { shadeLevel = target_level }, component = command.component }
+  window_shade_level(driver, device, new_command)
+end
+
 local tuya_curtain_driver = {
   NAME = "tuya curtain",
   lifecycle_handlers = {
@@ -170,6 +208,9 @@ local tuya_curtain_driver = {
     [capabilities.windowShadeLevel.ID] = {
       [capabilities.windowShadeLevel.commands.setShadeLevel.NAME] = window_shade_level
     },
+    [capabilities.statelessWindowShadeLevelStep.ID] = {
+      [capabilities.statelessWindowShadeLevelStep.commands.stepShadeLevel.NAME] = handle_step_shade_level
+    },
     [capabilities.windowShadePreset.ID] = {
       [capabilities.windowShadePreset.commands.presetPosition.NAME] = window_shade_preset,
       [capabilities.windowShadePreset.commands.setPresetPosition.NAME] = set_preset_position_cmd
diff --git a/drivers/Unofficial/tuya-zigbee/src/test/test_tuya_curtain.lua b/drivers/Unofficial/tuya-zigbee/src/test/test_tuya_curtain.lua
index ca09608347..dcbe0a2b9c 100644
--- a/drivers/Unofficial/tuya-zigbee/src/test/test_tuya_curtain.lua
+++ b/drivers/Unofficial/tuya-zigbee/src/test/test_tuya_curtain.lua
@@ -244,4 +244,168 @@ test.register_message_test(
       }
     }
 )
-test.run_registered_tests()
+
+test.register_message_test(
+    "Handle Window Shade step level command - step up",
+    {
+      {
+        channel = "capability",
+        direction = "receive",
+        message = { mock_simple_device.id, { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { 10 }, stepSize = 10 } }
+      },
+      {
+        channel = "zigbee",
+        direction = "send",
+        -- For _TZE284_nladmfvf, level is inverted: 100 - 10 = 90 (0x5A)
+        message = { mock_simple_device.id, tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x5a', 0) }
+      }
+    }
+)
+
+test.register_message_test(
+    "Handle Window Shade step level command - step down",
+    {
+      {
+        channel = "capability",
+        direction = "receive",
+        message = { mock_simple_device.id, { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { -10 }, stepSize = -10 } }
+      },
+      {
+        channel = "zigbee",
+        direction = "send",
+        -- For _TZE284_nladmfvf, level is inverted: 100 - 0 = 100 (0x64), but clamped to 0 so 100 - 0 = 100
+        message = { mock_simple_device.id, tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x64', 0) }
+      }
+    }
+)
+
+test.register_coroutine_test(
+  "Handle Window Shade step level command - step up from current level",
+  function()
+    -- First, simulate a current shade level of 40
+    test.socket.zigbee:__queue_receive({
+      mock_simple_device.id,
+      tuya_utils.build_test_attr_report(mock_simple_device, '\x03', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x28', 0x01)
+    })
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShadeLevel.shadeLevel(40))
+    )
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShade.windowShade("partially open"))
+    )
+    test.wait_for_events()
+    
+    -- Then send step command with stepSize 20, should result in level 60
+    -- For _TZE284_nladmfvf, level is inverted: 100 - 60 = 40 (0x28)
+    test.socket.capability:__queue_receive({
+      mock_simple_device.id,
+      { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { 20 }, stepSize = 20 }
+    })
+    test.socket.zigbee:__expect_send({
+      mock_simple_device.id,
+      tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x28', 0)
+    })
+  end
+)
+
+test.register_coroutine_test(
+  "Handle Window Shade step level command - step up clamped to 100",
+  function()
+    -- First, simulate a current shade level of 90
+    test.socket.zigbee:__queue_receive({
+      mock_simple_device.id,
+      tuya_utils.build_test_attr_report(mock_simple_device, '\x03', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x5a', 0x01)
+    })
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShadeLevel.shadeLevel(90))
+    )
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShade.windowShade("partially open"))
+    )
+    test.wait_for_events()
+    
+    -- Then send step command with stepSize 20, should be clamped to 100
+    -- For _TZE284_nladmfvf, level is inverted: 100 - 100 = 0 (0x00)
+    test.socket.capability:__queue_receive({
+      mock_simple_device.id,
+      { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { 20 }, stepSize = 20 }
+    })
+    test.socket.zigbee:__expect_send({
+      mock_simple_device.id,
+      tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x00', 0)
+    })
+  end
+)
+
+test.register_coroutine_test(
+  "Handle Window Shade step level command - step down clamped to 0",
+  function()
+    -- First, simulate a current shade level of 10
+    test.socket.zigbee:__queue_receive({
+      mock_simple_device.id,
+      tuya_utils.build_test_attr_report(mock_simple_device, '\x03', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x0a', 0x01)
+    })
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShadeLevel.shadeLevel(10))
+    )
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShade.windowShade("partially open"))
+    )
+    test.wait_for_events()
+    
+    -- Then send step command with stepSize -20, should be clamped to 0
+    -- For _TZE284_nladmfvf, level is inverted: 100 - 0 = 100 (0x64)
+    test.socket.capability:__queue_receive({
+      mock_simple_device.id,
+      { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { -20 }, stepSize = -20 }
+    })
+    test.socket.zigbee:__expect_send({
+      mock_simple_device.id,
+      tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x64', 0)
+    })
+  end
+)
+
+test.register_coroutine_test(
+  "Handle Window Shade step level command - uses latest_target_level when available",
+  function()
+    -- First, simulate a current shade level of 40
+    test.socket.zigbee:__queue_receive({
+      mock_simple_device.id,
+      tuya_utils.build_test_attr_report(mock_simple_device, '\x03', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x28', 0x01)
+    })
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShadeLevel.shadeLevel(40))
+    )
+    test.socket.capability:__expect_send(
+      mock_simple_device:generate_test_message("main", capabilities.windowShade.windowShade("partially open"))
+    )
+    test.wait_for_events()
+    
+    -- Send first step command to set latest_target_level to 50
+    -- For _TZE284_nladmfvf, level is inverted: 100 - 50 = 50 (0x32)
+    test.socket.capability:__queue_receive({
+      mock_simple_device.id,
+      { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { 10 }, stepSize = 10 }
+    })
+    test.socket.zigbee:__expect_send({
+      mock_simple_device.id,
+      tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x32', 0)
+    })
+    test.wait_for_events()
+    
+    -- Send second step command before timeout - should use latest_target_level (50) as base
+    -- Target = 50 + 10 = 60, For _TZE284_nladmfvf: 100 - 60 = 40 (0x28)
+    -- Packet ID is 1 because it was incremented after the first step command
+    test.socket.capability:__queue_receive({
+      mock_simple_device.id,
+      { capability = "statelessWindowShadeLevelStep", component = "main", command = "stepShadeLevel", args = { 10 }, stepSize = 10 }
+    })
+    test.socket.zigbee:__expect_send({
+      mock_simple_device.id,
+      tuya_utils.build_send_tuya_command(mock_simple_device, '\x02', tuya_utils.DP_TYPE_VALUE, '\x00\x00\x00\x28', 1)
+    })
+  end
+)
+
+test.run_registered_tests()
\ No newline at end of file