config.ini

# generated by PrusaSlicer 2.5.2+win64 on 2023-04-25 at 11:56:12 UTC
avoid_crossing_perimeters = 0
avoid_crossing_perimeters_max_detour = 0
bed_custom_model = 
bed_custom_texture = 
bed_shape = 124.315x13.0661,122.268x25.989,118.882x38.6271,114.193x50.8421,108.253x62.5,101.127x73.4732,92.8931x83.6413,83.6413x92.8931,73.4732x101.127,62.5x108.253,50.8421x114.193,38.6271x118.882,25.989x122.268,13.0661x124.315,3.54096e-14x125,-13.0661x124.315,-25.989x122.268,-38.6271x118.882,-50.8421x114.193,-62.5x108.253,-73.4732x101.127,-83.6413x92.8931,-92.8931x83.6413,-101.127x73.4732,-108.253x62.5,-114.193x50.8421,-118.882x38.6271,-122.268x25.989,-124.315x13.0661,-125x7.08192e-14,-124.315x-13.0661,-122.268x-25.989,-118.882x-38.6271,-114.193x-50.8421,-108.253x-62.5,-101.127x-73.4732,-92.8931x-83.6413,-83.6413x-92.8931,-73.4732x-101.127,-62.5x-108.253,-50.8421x-114.193,-38.6271x-118.882,-25.989x-122.268,-13.0661x-124.315,-2.29621e-14x-125,13.0661x-124.315,25.989x-122.268,38.6271x-118.882,50.8421x-114.193,62.5x-108.253,73.4732x-101.127,83.6413x-92.8931,92.8931x-83.6413,101.127x-73.4732,108.253x-62.5,114.193x-50.8421,118.882x-38.6271,122.268x-25.989,124.315x-13.0661,125x-1.41638e-13
bed_temperature = 50
before_layer_gcode = ; BEFORE_LAYER_CHANGE\n;[layer_z]\nG92 E0\n
between_objects_gcode = 
bottom_fill_pattern = monotonic
bottom_solid_layers = 4
bottom_solid_min_thickness = 0.7
bridge_acceleration = 1000
bridge_angle = 0
bridge_fan_speed = 100
bridge_flow_ratio = 0.95
bridge_speed = 30
brim_separation = 0
brim_type = outer_only
brim_width = 0
clip_multipart_objects = 1
color_change_gcode = M600
colorprint_heights = 
compatible_printers_condition_cummulative = "printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and nozzle_diameter[0]==0.4";"printer_notes=~/.*PRINTER_VENDOR_TRILAB.*/ and printer_notes=~/.*PRINTER_FAMILY_DQ.*/ and !(printer_notes=~/.*FLEXPRINT.*/) and nozzle_diameter[0]==0.4"
complete_objects = 0
cooling = 1
cooling_tube_length = 5
cooling_tube_retraction = 91.5
default_acceleration = 2000
default_filament_profile = "DeltiQ - PLA - Prusament (Prusa Polymers)"
default_print_profile = DeltiQ 0.20mm Normal
deretract_speed = 0
disable_fan_first_layers = 3
dont_support_bridges = 0
draft_shield = disabled
duplicate_distance = 6
elefant_foot_compensation = 0.1
end_filament_gcode = "; FILAMENT_END_GCODE"
end_gcode = ; END_GCODE\n\nM140 S0 ; Turn off bed\n\nM104 S0 ; Turn off nozzle\n\nM104 S0 ; Turn off extruder\nM107 ; Turn off fan\n\nG90 ; Absolute positioning\nM220 S100  ; Feedmultiply back to 100percent\n\nM84 S5; Disable motors
ensure_vertical_shell_thickness = 0
external_perimeter_acceleration = 0
external_perimeter_extrusion_width = 0.45
external_perimeter_speed = 30
external_perimeters_first = 0
extra_loading_move = -2
extra_perimeters = 0
extruder_clearance_height = 60
extruder_clearance_radius = 45
extruder_colour = #EC626F
extruder_offset = 0x0
extrusion_axis = E
extrusion_multiplier = 1
extrusion_width = 0.45
fan_always_on = 1
fan_below_layer_time = 100
filament_colour = #EC626F
filament_cooling_final_speed = 3.4
filament_cooling_initial_speed = 2.2
filament_cooling_moves = 4
filament_cost = 29.99
filament_density = 1.24
filament_deretract_speed = nil
filament_diameter = 1.75
filament_load_time = 0
filament_loading_speed = 28
filament_loading_speed_start = 3
filament_max_volumetric_speed = 8
filament_minimal_purge_on_wipe_tower = 15
filament_notes = LP-CU
filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
filament_retract_before_travel = 2
filament_retract_before_wipe = 90%
filament_retract_layer_change = 1
filament_retract_length = 1.0
filament_retract_lift = 0.2
filament_retract_lift_above = nil
filament_retract_lift_below = nil
filament_retract_restart_extra = nil
filament_retract_speed = 35
filament_settings_id = "DeltiQ - PLA - Prusament (Prusa Polymers)"
filament_soluble = 0
filament_spool_weight = 201
filament_toolchange_delay = 0
filament_type = PLA
filament_unload_time = 0
filament_unloading_speed = 90
filament_unloading_speed_start = 100
filament_vendor = Prusa Polymers
filament_wipe = 1
fill_angle = 45
fill_density = 15%
fill_pattern = hilbertcurve
first_layer_acceleration = 1000
first_layer_acceleration_over_raft = 0
first_layer_bed_temperature = 50
first_layer_extrusion_width = 0.42
first_layer_height = 0.2
first_layer_speed = 20
first_layer_speed_over_raft = 30
first_layer_temperature = 210
full_fan_speed_layer = 0
fuzzy_skin = none
fuzzy_skin_point_dist = 0.8
fuzzy_skin_thickness = 0.3
gap_fill_enabled = 1
gap_fill_speed = 40
gcode_comments = 0
gcode_flavor = reprapfirmware
gcode_label_objects = 0
gcode_resolution = 0.0125
gcode_substitutions = 
high_current_on_filament_swap = 0
host_type = octoprint
infill_acceleration = 2000
infill_anchor = 600%
infill_anchor_max = 50
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.45
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 60
interface_shells = 0
ironing = 0
ironing_flowrate = 15%
ironing_spacing = 0.1
ironing_speed = 15
ironing_type = top
layer_gcode = ; AFTER_LAYER_CHANGE\n;[layer_z]
layer_height = 0.2
machine_limits_usage = time_estimate_only
machine_max_acceleration_e = 9000
machine_max_acceleration_extruding = 1000
machine_max_acceleration_retracting = 1000
machine_max_acceleration_travel = 2000
machine_max_acceleration_x = 2000
machine_max_acceleration_y = 2000
machine_max_acceleration_z = 2000
machine_max_feedrate_e = 50
machine_max_feedrate_x = 300
machine_max_feedrate_y = 300
machine_max_feedrate_z = 300
machine_max_jerk_e = 20
machine_max_jerk_x = 10
machine_max_jerk_y = 10
machine_max_jerk_z = 10
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
max_fan_speed = 100
max_layer_height = 0.25
max_print_height = 300
max_print_speed = 60
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_bead_width = 85%
min_fan_speed = 100
min_feature_size = 25%
min_layer_height = 0.15
min_print_speed = 10
min_skirt_length = 4
mmu_segmented_region_max_width = 0
notes = 
nozzle_diameter = 0.4
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{printer_model}_{filament_type[0]}_{filament_notes[0]}_{print_time}_{round(total_weight)}g_{year}{zdigits(month, 2)}{zdigits(day, 2)}-{zdigits(hour, 2)}{zdigits(minute, 2)}.gcode
overhangs = 0
parking_pos_retraction = 92
pause_print_gcode = M25
perimeter_acceleration = 1500
perimeter_extruder = 1
perimeter_extrusion_width = 0.45
perimeter_generator = arachne
perimeter_speed = 45
perimeters = 2
physical_printer_settings_id = 
post_process = 
print_host = 
print_settings_id = DeltiQ 0.20mm Normal
printer_model = DQ2
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_TRILAB\nPRINTER_FAMILY_DQ\nPRINTER_MODEL_DQ2
printer_settings_id = DeltiQ 2
printer_technology = FFF
printer_variant = 0.4
printer_vendor = TriLAB Group s.r.o.
printhost_apikey = 
printhost_cafile = 
raft_contact_distance = 0.1
raft_expansion = 1.5
raft_first_layer_density = 90%
raft_first_layer_expansion = 3
raft_layers = 0
remaining_times = 0
resolution = 0
retract_before_travel = 3
retract_before_wipe = 100%
retract_layer_change = 1
retract_length = 4
retract_length_toolchange = 10
retract_lift = 0.2
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 30
seam_position = nearest
silent_mode = 0
single_extruder_multi_material = 0
single_extruder_multi_material_priming = 0
skirt_distance = 3
skirt_height = 2
skirts = 1
slice_closing_radius = 0.049
slicing_mode = regular
slowdown_below_layer_time = 4
small_perimeter_speed = 20
solid_infill_acceleration = 0
solid_infill_below_area = 20
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.45
solid_infill_speed = 60
spiral_vase = 0
standby_temperature_delta = -5
start_filament_gcode = "; FILAMENT_START_GCODE"
start_gcode = ; START_GCODE\n\nT0 ; Select Titan extruder\nM220 S100 ; Set feedmultiply back to 100percent\n\nG90 ; Absolute positioning\nM83; Relative Extruder\n\nG28 ; Home all axes\n\nM190 S[first_layer_bed_temperature] ; Set and wait - bed temperature\nM104 S[first_layer_temperature]\n\nG32 ; Probe Z and calculate Z plane\nG29 ; Mesh bed probe\n\nM572 S0.2 ;set pressure advance factor\n\nG92 E0 ; Zero extruder
support_material = 0
support_material_angle = 30
support_material_auto = 1
support_material_bottom_contact_distance = 0
support_material_bottom_interface_layers = -1
support_material_buildplate_only = 0
support_material_closing_radius = 2
support_material_contact_distance = 0.1
support_material_enforce_layers = 0
support_material_extruder = 0
support_material_extrusion_width = 0.35
support_material_interface_contact_loops = 0
support_material_interface_extruder = 0
support_material_interface_layers = 4
support_material_interface_pattern = rectilinear
support_material_interface_spacing = 0.4
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 50
support_material_style = grid
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 0.6
temperature = 210
template_custom_gcode = 
thick_bridges = 1
thin_walls = 0
threads = 8
thumbnails = 
thumbnails_format = PNG
toolchange_gcode = 
top_fill_pattern = monotonic
top_infill_extrusion_width = 0.4
top_solid_infill_acceleration = 0
top_solid_infill_speed = 40
top_solid_layers = 5
top_solid_min_thickness = 0.7
travel_speed = 150
travel_speed_z = 0
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 0
wall_distribution_count = 1
wall_transition_angle = 10
wall_transition_filter_deviation = 25%
wall_transition_length = 100%
wipe = 1
wipe_into_infill = 0
wipe_into_objects = 0
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_brim_width = 2
wipe_tower_no_sparse_layers = 0
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 180
wipe_tower_y = 140
wiping_volumes_extruders = 70,70
wiping_volumes_matrix = 0
xy_size_compensation = 0
z_offset = 0