Skip to content

env_variables.md

Latest commit

 

History

History
663 lines (505 loc) · 31 KB

env_variables.md

File metadata and controls

663 lines (505 loc) · 31 KB

Environmental variables

This document discusses the environment variables used by American Fuzzy Lop++ to expose various exotic functions that may be (rarely) useful for power users or for some types of custom fuzzing setups. See README.md for the general instruction manual.

Note that most tools will warn on any unknown AFL environment variables. This is for warning on typos that can happen. If you want to disable this check then set the AFL_IGNORE_UNKNOWN_ENVS environment variable.

1) Settings for all compilers

Starting with AFL++ 3.0 there is only one compiler: afl-cc To select the different instrumentation modes this can be done by

  1. passing the --afl-MODE command line option to the compiler
  2. or using a symlink to afl-cc: afl-gcc, afl-g++, afl-clang, afl-clang++, afl-clang-fast, afl-clang-fast++, afl-clang-lto, afl-clang-lto++, afl-gcc-fast, afl-g++-fast
  3. or using the environment variable AFL_CC_COMPILER with MODE

MODE can be one of LTO (afl-clang-lto*), LLVM (afl-clang-fast*), GCC_PLUGIN (afl-g*-fast) or GCC (afl-gcc/afl-g++).

Because (with the exception of the --afl-MODE command line option) the compile-time tools do not accept AFL specific command-line options, they make fairly broad use of environmental variables instead:

  • Some build/configure scripts break with AFL++ compilers. To be able to pass them, do:
       export CC=afl-cc
       export CXX=afl-c++
       export AFL_NOOPT=1
       ./configure --disable-shared --disabler-werror
       unset AFL_NOOPT
       make

  • Most AFL tools do not print any output if stdout/stderr are redirected. If you want to get the output into a file then set the AFL_DEBUG environment variable. This is sadly necessary for various build processes which fail otherwise.

  • Setting AFL_HARDEN automatically adds code hardening options when invoking the downstream compiler. This currently includes -D_FORTIFY_SOURCE=2 and -fstack-protector-all. The setting is useful for catching non-crashing memory bugs at the expense of a very slight (sub-5%) performance loss.

  • By default, the wrapper appends -O3 to optimize builds. Very rarely, this will cause problems in programs built with -Werror, simply because -O3 enables more thorough code analysis and can spew out additional warnings. To disable optimizations, set AFL_DONT_OPTIMIZE. However if -O... and/or -fno-unroll-loops are set, these are not overridden.

  • Setting AFL_USE_ASAN automatically enables ASAN, provided that your compiler supports it.

    (You can also enable MSAN via AFL_USE_MSAN; ASAN and MSAN come with the same gotchas; the modes are mutually exclusive. UBSAN can be enabled similarly by setting the environment variable AFL_USE_UBSAN=1. Finally there is the Control Flow Integrity sanitizer that can be activated by AFL_USE_CFISAN=1)

  • Setting AFL_USE_LSAN automatically enables Leak-Sanitizer, provided that your compiler supports it. To perform a leak check within your program at a certain point (such as at the end of an __AFL_LOOP), you can run the macro __AFL_LEAK_CHECK(); which will cause an abort if any memory is leaked (you can combine this with the LSAN_OPTIONS=suppressions option to supress some known leaks).

  • Setting AFL_CC, AFL_CXX, and AFL_AS lets you use alternate downstream compilation tools, rather than the default 'clang', 'gcc', or 'as' binaries in your $PATH.

  • AFL_PATH can be used to point afl-gcc to an alternate location of afl-as. One possible use of this is utils/clang_asm_normalize/, which lets you instrument hand-written assembly when compiling clang code by plugging a normalizer into the chain. (There is no equivalent feature for GCC.)

  • Setting AFL_INST_RATIO to a percentage between 0 and 100 controls the probability of instrumenting every branch. This is (very rarely) useful when dealing with exceptionally complex programs that saturate the output bitmap. Examples include v8, ffmpeg, and perl.

    (If this ever happens, afl-fuzz will warn you ahead of the time by displaying the "bitmap density" field in fiery red.)

    Setting AFL_INST_RATIO to 0 is a valid choice. This will instrument only the transitions between function entry points, but not individual branches.

    Note that this is an outdated variable. A few instances (e.g. afl-gcc) still support these, but state-of-the-art (e.g. LLVM LTO and LLVM PCGUARD) do not need this.

  • AFL_NO_BUILTIN causes the compiler to generate code suitable for use with libtokencap.so (but perhaps running a bit slower than without the flag).

  • TMPDIR is used by afl-as for temporary files; if this variable is not set, the tool defaults to /tmp.

  • If you are a weird person that wants to compile and instrument asm text files then use the AFL_AS_FORCE_INSTRUMENT variable: AFL_AS_FORCE_INSTRUMENT=1 afl-gcc foo.s -o foo

  • Setting AFL_QUIET will prevent afl-cc and afl-as banners from being displayed during compilation, in case you find them distracting.

2) Settings for LLVM and LTO: afl-clang-fast / afl-clang-fast++ / afl-clang-lto / afl-clang-lto++

The native instrumentation helpers (instrumentation and gcc_plugin) accept a subset of the settings discussed in section 1, with the exception of:

  • LLVM modes support AFL_LLVM_DICT2FILE=/absolute/path/file.txt which will write all constant string comparisons to this file to be used later with afl-fuzz' -x option.

  • AFL_AS, since this toolchain does not directly invoke GNU as.

  • TMPDIR and AFL_KEEP_ASSEMBLY, since no temporary assembly files are created.

  • AFL_INST_RATIO, as we by default use collision free instrumentation. Not all passes support this option though as it is an outdated feature.

Then there are a few specific features that are only available in instrumentation mode:

Select the instrumentation mode

- `AFL_LLVM_INSTRUMENT` - this configures the instrumentation mode. 
  Available options:
    PCGUARD - our own pcgard based instrumentation (default)
    NATIVE - clang's original pcguard based instrumentation
    CLASSIC - classic AFL (map[cur_loc ^ prev_loc >> 1]++) (default)
    LTO - LTO instrumentation (see below)
    CTX - context sensitive instrumentation (see below)
    NGRAM-x - deeper previous location coverage (from NGRAM-2 up to NGRAM-16)
    GCC - outdated gcc instrumentation
    CLANG - outdated clang instrumentation
  In CLASSIC you can also specify CTX and/or NGRAM, seperate the options
  with a comma "," then, e.g.:
    `AFL_LLVM_INSTRUMENT=CLASSIC,CTX,NGRAM-4`
  Note that this is actually not a good idea to use both CTX and NGRAM :)

LTO

This is a different kind way of instrumentation: first it compiles all code in LTO (link time optimization) and then performs an edge inserting instrumentation which is 100% collision free (collisions are a big issue in AFL and AFL-like instrumentations). This is performed by using afl-clang-lto/afl-clang-lto++ instead of afl-clang-fast, but is only built if LLVM 11 or newer is used.

  • AFL_LLVM_INSTRUMENT=CFG will use Control Flow Graph instrumentation. (not recommended for afl-clang-fast, default for afl-clang-lto as there it is a different and better kind of instrumentation.)

None of the following options are necessary to be used and are rather for manual use (which only ever the author of this LTO implementation will use). These are used if several separated instrumentations are performed which are then later combined.

  • AFL_LLVM_DOCUMENT_IDS=file will document to a file which edge ID was given to which function. This helps to identify functions with variable bytes or which functions were touched by an input.
  • AFL_LLVM_MAP_ADDR sets the fixed map address to a different address than the default 0x10000. A value of 0 or empty sets the map address to be dynamic (the original AFL way, which is slower)
  • AFL_LLVM_MAP_DYNAMIC sets the shared memory address to be dynamic
  • AFL_LLVM_LTO_STARTID sets the starting location ID for the instrumentation. This defaults to 1
  • AFL_LLVM_LTO_DONTWRITEID prevents that the highest location ID written into the instrumentation is set in a global variable

See instrumentation/README.lto.md for more information.

NGRAM

  • Setting AFL_LLVM_NGRAM_SIZE or AFL_LLVM_INSTRUMENT=NGRAM-{value} activates ngram prev_loc coverage, good values are 2, 4 or 8 (any value between 2 and 16 is valid). It is highly recommended to increase the MAP_SIZE_POW2 definition in config.h to at least 18 and maybe up to 20 for this as otherwise too many map collisions occur.

See instrumentation/README.ngram.md

CTX

  • Setting AFL_LLVM_CTX or AFL_LLVM_INSTRUMENT=CTX activates context sensitive branch coverage - meaning that each edge is additionally combined with its caller. It is highly recommended to increase the MAP_SIZE_POW2 definition in config.h to at least 18 and maybe up to 20 for this as otherwise too many map collisions occur.

See instrumentation/README.ctx.md

LAF-INTEL

This great feature will split compares into series of single byte comparisons to allow afl-fuzz to find otherwise rather impossible paths. It is not restricted to Intel CPUs ;-)

  • Setting AFL_LLVM_LAF_TRANSFORM_COMPARES will split string compare functions

  • Setting AFL_LLVM_LAF_SPLIT_SWITCHES will split all switch constructs

  • Setting AFL_LLVM_LAF_SPLIT_COMPARES will split all floating point and 64, 32 and 16 bit integer CMP instructions

  • Setting AFL_LLVM_LAF_SPLIT_FLOATS will split floating points, needs AFL_LLVM_LAF_SPLIT_COMPARES to be set

  • Setting AFL_LLVM_LAF_ALL sets all of the above

See instrumentation/README.laf-intel.md for more information.

INSTRUMENT LIST (selectively instrument files and functions)

This feature allows selective instrumentation of the source

  • Setting AFL_LLVM_ALLOWLIST or AFL_LLVM_DENYLIST with a filenames and/or function will only instrument (or skip) those files that match the names listed in the specified file.

See instrumentation/README.instrument_list.md for more information.

Thread safe instrumentation counters (in all modes)

  • Setting AFL_LLVM_THREADSAFE_INST will inject code that implements thread safe counters. The overhead is a little bit higher compared to the older non-thread safe case. Note that this disables neverzero (see below).

NOT_ZERO

  • Setting AFL_LLVM_NOT_ZERO=1 during compilation will use counters that skip zero on overflow. This is the default for llvm >= 9, however for llvm versions below that this will increase an unnecessary slowdown due a performance issue that is only fixed in llvm 9+. This feature increases path discovery by a little bit.

  • Setting AFL_LLVM_SKIP_NEVERZERO=1 will not implement the skip zero test. If the target performs only few loops then this will give a small performance boost.

See instrumentation/README.neverzero.md

CMPLOG

  • Setting AFL_LLVM_CMPLOG=1 during compilation will tell afl-clang-fast to produce a CmpLog binary.

See instrumentation/README.cmplog.md

3) Settings for GCC / GCC_PLUGIN modes

Then there are a few specific features that are only available in GCC and GCC_PLUGIN mode.

  • Setting AFL_KEEP_ASSEMBLY prevents afl-as from deleting instrumented assembly files. Useful for troubleshooting problems or understanding how the tool works. (GCC mode only) To get them in a predictable place, try something like:
    mkdir assembly_here
    TMPDIR=$PWD/assembly_here AFL_KEEP_ASSEMBLY=1 make clean all
  • Setting AFL_GCC_INSTRUMENT_FILE with a filename will only instrument those files that match the names listed in this file (one filename per line). See instrumentation/README.instrument_list.md for more information. (GCC_PLUGIN mode only)

4) Settings for afl-fuzz

The main fuzzer binary accepts several options that disable a couple of sanity checks or alter some of the more exotic semantics of the tool:

  • Setting AFL_SKIP_CPUFREQ skips the check for CPU scaling policy. This is useful if you can't change the defaults (e.g., no root access to the system) and are OK with some performance loss.

  • AFL_EXIT_WHEN_DONE causes afl-fuzz to terminate when all existing paths have been fuzzed and there were no new finds for a while. This would be normally indicated by the cycle counter in the UI turning green. May be convenient for some types of automated jobs.

  • AFL_EXIT_ON_TIME Causes afl-fuzz to terminate if no new paths were found within a specified period of time (in seconds). May be convenient for some types of automated jobs.

  • AFL_EXIT_ON_SEED_ISSUES will restore the vanilla afl-fuzz behaviour which does not allow crashes or timeout seeds in the initial -i corpus.

  • AFL_MAP_SIZE sets the size of the shared map that afl-fuzz, afl-showmap, afl-tmin and afl-analyze create to gather instrumentation data from the target. This must be equal or larger than the size the target was compiled with.

  • AFL_CMPLOG_ONLY_NEW will only perform the expensive cmplog feature for newly found testcases and not for testcases that are loaded on startup (-i in). This is an important feature to set when resuming a fuzzing session.

  • AFL_TESTCACHE_SIZE allows you to override the size of #define TESTCASE_CACHE in config.h. Recommended values are 50-250MB - or more if your fuzzing finds a huge amount of paths for large inputs.

  • Setting AFL_DISABLE_TRIM tells afl-fuzz not to trim test cases. This is usually a bad idea!

  • Setting AFL_NO_AFFINITY disables attempts to bind to a specific CPU core on Linux systems. This slows things down, but lets you run more instances of afl-fuzz than would be prudent (if you really want to).

  • Setting AFL_TRY_AFFINITY tries to attempt binding to a specific CPU core on Linux systems, but will not terminate if that fails.

  • Setting AFL_NO_AUTODICT will not load an LTO generated auto dictionary that is compiled into the target.

  • Setting AFL_HANG_TMOUT allows you to specify a different timeout for deciding if a particular test case is a "hang". The default is 1 second or the value of the -t parameter, whichever is larger. Dialing the value down can be useful if you are very concerned about slow inputs, or if you don't want AFL++ to spend too much time classifying that stuff and just rapidly put all timeouts in that bin.

  • Setting AFL_FORKSRV_INIT_TMOUT allows you to specify a different timeout to wait for the forkserver to spin up. The default is the -t value times FORK_WAIT_MULT from config.h (usually 10), so for a -t 100, the default would wait for 1000 milliseconds. Setting a different time here is useful if the target has a very slow startup time, for example when doing full-system fuzzing or emulation, but you don't want the actual runs to wait too long for timeouts.

  • AFL_NO_ARITH causes AFL++ to skip most of the deterministic arithmetics. This can be useful to speed up the fuzzing of text-based file formats.

  • AFL_NO_SNAPSHOT will advice afl-fuzz not to use the snapshot feature if the snapshot lkm is loaded

  • AFL_SHUFFLE_QUEUE randomly reorders the input queue on startup. Requested by some users for unorthodox parallelized fuzzing setups, but not advisable otherwise.

  • AFL_TMPDIR is used to write the .cur_input file to if exists, and in the normal output directory otherwise. You would use this to point to a ramdisk/tmpfs. This increases the speed by a small value but also reduces the stress on SSDs.

  • When developing custom instrumentation on top of afl-fuzz, you can use AFL_SKIP_BIN_CHECK to inhibit the checks for non-instrumented binaries and shell scripts; and AFL_DUMB_FORKSRV in conjunction with the -n setting to instruct afl-fuzz to still follow the fork server protocol without expecting any instrumentation data in return. Note that this also turns off auto map size detection.

  • When running in the -M or -S mode, setting AFL_IMPORT_FIRST causes the fuzzer to import test cases from other instances before doing anything else. This makes the "own finds" counter in the UI more accurate. Beyond counter aesthetics, not much else should change.

  • Note that AFL_POST_LIBRARY is deprecated, use AFL_CUSTOM_MUTATOR_LIBRARY instead (see below).

  • AFL_KILL_SIGNAL: Set the signal ID to be delivered to child processes on timeout. Unless you implement your own targets or instrumentation, you likely don't have to set it. By default, on timeout and on exit, SIGKILL (AFL_KILL_SIGNAL=9) will be delivered to the child.

  • Setting AFL_CUSTOM_MUTATOR_LIBRARY to a shared library with afl_custom_fuzz() creates additional mutations through this library. If afl-fuzz is compiled with Python (which is autodetected during building afl-fuzz), setting AFL_PYTHON_MODULE to a Python module can also provide additional mutations. If AFL_CUSTOM_MUTATOR_ONLY is also set, all mutations will solely be performed with the custom mutator. This feature allows to configure custom mutators which can be very helpful, e.g. fuzzing XML or other highly flexible structured input. Please see custom_mutators.md.

  • AFL_FAST_CAL keeps the calibration stage about 2.5x faster (albeit less precise), which can help when starting a session against a slow target. AFL_CAL_FAST works too.

  • The CPU widget shown at the bottom of the screen is fairly simplistic and may complain of high load prematurely, especially on systems with low core counts. To avoid the alarming red color, you can set AFL_NO_CPU_RED.

  • In QEMU mode (-Q) and Frida mode (-O), AFL_PATH will be searched for afl-qemu-trace and afl-frida-trace.so.

  • In QEMU mode (-Q), setting AFL_QEMU_CUSTOM_BIN cause afl-fuzz to skip prepending afl-qemu-trace to your command line. Use this if you wish to use a custom afl-qemu-trace or if you need to modify the afl-qemu-trace arguments.

  • Setting AFL_CYCLE_SCHEDULES will switch to a different schedule everytime a cycle is finished.

  • Setting AFL_EXPAND_HAVOC_NOW will start in the extended havoc mode that includes costly mutations. afl-fuzz automatically enables this mode when deemed useful otherwise.

  • Setting AFL_PRELOAD causes AFL++ to set LD_PRELOAD for the target binary without disrupting the afl-fuzz process itself. This is useful, among other things, for bootstrapping libdislocator.so.

  • Setting AFL_TARGET_ENV causes AFL++ to set extra environment variables for the target binary. Example: AFL_TARGET_ENV="VAR1=1 VAR2='a b c'" afl-fuzz ... This exists mostly for things like LD_LIBRARY_PATH but it would theoretically allow fuzzing of AFL++ itself (with 'target' AFL++ using some AFL_ vars that would disrupt work of 'fuzzer' AFL++).

  • Setting AFL_NO_UI inhibits the UI altogether, and just periodically prints some basic stats. This behavior is also automatically triggered when the output from afl-fuzz is redirected to a file or to a pipe.

  • Setting AFL_NO_COLOR or AFL_NO_COLOUR will omit control sequences for coloring console output when configured with USE_COLOR and not ALWAYS_COLORED.

  • Setting AFL_FORCE_UI will force painting the UI on the screen even if no valid terminal was detected (for virtual consoles)

  • If you are using persistent mode (you should, see instrumentation/README.persistent_mode.md) some targets keep inherent state due which a detected crash testcase does not crash the target again when the testcase is given. To be able to still re-trigger these crashes you can use the AFL_PERSISTENT_RECORD variable with a value of how many previous fuzz cases to keep prio a crash. if set to e.g. 10, then the 9 previous inputs are written to out/default/crashes as RECORD:000000,cnt:000000 to RECORD:000000,cnt:000008 and RECORD:000000,cnt:000009 being the crash case. NOTE: This option needs to be enabled in config.h first!

  • If afl-fuzz encounters an incorrect fuzzing setup during a fuzzing session (not at startup), it will terminate. If you do not want this then you can set AFL_IGNORE_PROBLEMS.

  • If you are Jakub, you may need AFL_I_DONT_CARE_ABOUT_MISSING_CRASHES. Others need not apply, unless they also want to disable the /proc/sys/kernel/core_pattern check.

  • Benchmarking only: AFL_BENCH_JUST_ONE causes the fuzzer to exit after processing the first queue entry; and AFL_BENCH_UNTIL_CRASH causes it to exit soon after the first crash is found.

  • Setting AFL_DEBUG_CHILD will not suppress the child output. This lets you see all output of the child, making setup issues obvious. For example, in an unicornafl harness, you might see python stacktraces. You may also see other logs that way, indicating why the forkserver won't start. Not pretty but good for debugging purposes. Note that AFL_DEBUG_CHILD_OUTPUT is deprecated.

  • Setting AFL_NO_CPU_RED will not display very high cpu usages in red color.

  • Setting AFL_AUTORESUME will resume a fuzz run (same as providing -i -) for an existing out folder, even if a different -i was provided. Without this setting, afl-fuzz will refuse execution for a long-fuzzed out dir.

  • Setting AFL_MAX_DET_EXRAS will change the threshold at what number of elements in the -x dictionary and LTO autodict (combined) the probabilistic mode will kick off. In probabilistic mode, not all dictionary entries will be used all of the time for fuzzing mutations to not slow down fuzzing. The default count is 200 elements. So for the 200 + 1st element, there is a 1 in 201 chance, that one of the dictionary entries will not be used directly.

  • Setting AFL_NO_FORKSRV disables the forkserver optimization, reverting to fork + execve() call for every tested input. This is useful mostly when working with unruly libraries that create threads or do other crazy things when initializing (before the instrumentation has a chance to run).

    Note that this setting inhibits some of the user-friendly diagnostics normally done when starting up the forkserver and causes a pretty significant performance drop.

  • Setting AFL_STATSD enables StatsD metrics collection. By default AFL++ will send these metrics over UDP to 127.0.0.1:8125. The host and port are configurable with AFL_STATSD_HOST and AFL_STATSD_PORT respectively. To enable tags (banner and afl_version) you should provide AFL_STATSD_TAGS_FLAVOR that matches your StatsD server (see AFL_STATSD_TAGS_FLAVOR)

  • Setting AFL_STATSD_TAGS_FLAVOR to one of dogstatsd, librato, signalfx or influxdb allows you to add tags to your fuzzing instances. This is especially useful when running multiple instances (-M/-S for example). Applied tags are banner and afl_version. banner corresponds to the name of the fuzzer provided through -M/-S. afl_version corresponds to the currently running AFL version (e.g ++3.0c). Default (empty/non present) will add no tags to the metrics. See rpc_statsd.md for more information.

  • Setting AFL_CRASH_EXITCODE sets the exit code AFL treats as crash. For example, if AFL_CRASH_EXITCODE='-1' is set, each input resulting in an -1 return code (i.e. exit(-1) got called), will be treated as if a crash had ocurred. This may be beneficial if you look for higher-level faulty conditions in which your target still exits gracefully.

  • Outdated environment variables that are not supported anymore: AFL_DEFER_FORKSRV AFL_PERSISTENT

5) Settings for afl-qemu-trace

The QEMU wrapper used to instrument binary-only code supports several settings:

  • It is possible to set AFL_INST_RATIO to skip the instrumentation on some of the basic blocks, which can be useful when dealing with very complex binaries.

  • Setting AFL_INST_LIBS causes the translator to also instrument the code inside any dynamically linked libraries (notably including glibc).

  • Setting AFL_COMPCOV_LEVEL enables the CompareCoverage tracing of all cmp and sub in x86 and x86_64 and memory comparions functions (e.g. strcmp, memcmp, ...) when libcompcov is preloaded using AFL_PRELOAD. More info at qemu_mode/libcompcov/README.md. There are two levels at the moment, AFL_COMPCOV_LEVEL=1 that instruments only comparisons with immediate values / read-only memory and AFL_COMPCOV_LEVEL=2 that instruments all the comparions. Level 2 is more accurate but may need a larger shared memory.

  • Setting AFL_QEMU_COMPCOV enables the CompareCoverage tracing of all cmp and sub in x86 and x86_64. This is an alias of AFL_COMPCOV_LEVEL=1 when AFL_COMPCOV_LEVEL is not specified.

  • The underlying QEMU binary will recognize any standard "user space emulation" variables (e.g., QEMU_STACK_SIZE), but there should be no reason to touch them.

  • AFL_DEBUG will print the found entrypoint for the binary to stderr. Use this if you are unsure if the entrypoint might be wrong - but use it directly, e.g. afl-qemu-trace ./program

  • AFL_ENTRYPOINT allows you to specify a specific entrypoint into the binary (this can be very good for the performance!). The entrypoint is specified as hex address, e.g. 0x4004110 Note that the address must be the address of a basic block.

  • When the target is i386/x86_64 you can specify the address of the function that has to be the body of the persistent loop using AFL_QEMU_PERSISTENT_ADDR=start addr.

  • Another modality to execute the persistent loop is to specify also the AFL_QEMU_PERSISTENT_RET=end addr env variable. With this variable assigned, instead of patching the return address, the specified instruction is transformed to a jump towards start addr.

  • AFL_QEMU_PERSISTENT_GPR=1 QEMU will save the original value of general purpose registers and restore them in each persistent cycle.

  • With AFL_QEMU_PERSISTENT_RETADDR_OFFSET you can specify the offset from the stack pointer in which QEMU can find the return address when start addr is hit.

  • With AFL_USE_QASAN you can enable QEMU AddressSanitizer for dynamically linked binaries.

  • With AFL_QEMU_FORCE_DFL you force QEMU to ignore the registered signal handlers of the target.

6) Settings for afl-cmin

The corpus minimization script offers very little customization:

  • Setting AFL_PATH offers a way to specify the location of afl-showmap and afl-qemu-trace (the latter only in -Q mode).

  • AFL_KEEP_TRACES makes the tool keep traces and other metadata used for minimization and normally deleted at exit. The files can be found in the <out_dir>/.traces/ directory.

  • AFL_ALLOW_TMP permits this and some other scripts to run in /tmp. This is a modest security risk on multi-user systems with rogue users, but should be safe on dedicated fuzzing boxes.

  • AFL_PRINT_FILENAMES prints each filename to stdout, as it gets processed. This can help when embedding afl-cmin or afl-showmap in other scripts scripting.

7) Settings for afl-tmin

Virtually nothing to play with. Well, in QEMU mode (-Q), AFL_PATH will be searched for afl-qemu-trace. In addition to this, TMPDIR may be used if a temporary file can't be created in the current working directory.

You can specify AFL_TMIN_EXACT if you want afl-tmin to require execution paths to match when minimizing crashes. This will make minimization less useful, but may prevent the tool from "jumping" from one crashing condition to another in very buggy software. You probably want to combine it with the -e flag.

8) Settings for afl-analyze

You can set AFL_ANALYZE_HEX to get file offsets printed as hexadecimal instead of decimal.

9) Settings for libdislocator

The library honors these environmental variables:

  • AFL_LD_LIMIT_MB caps the size of the maximum heap usage permitted by the library, in megabytes. The default value is 1 GB. Once this is exceeded, allocations will return NULL.

  • AFL_LD_HARD_FAIL alters the behavior by calling abort() on excessive allocations, thus causing what AFL++ would perceive as a crash. Useful for programs that are supposed to maintain a specific memory footprint.

  • AFL_LD_VERBOSE causes the library to output some diagnostic messages that may be useful for pinpointing the cause of any observed issues.

  • AFL_LD_NO_CALLOC_OVER inhibits abort() on calloc() overflows. Most of the common allocators check for that internally and return NULL, so it's a security risk only in more exotic setups.

  • AFL_ALIGNED_ALLOC=1 will force the alignment of the allocation size to max_align_t to be compliant with the C standard.

10) Settings for libtokencap

This library accepts AFL_TOKEN_FILE to indicate the location to which the discovered tokens should be written.

11) Third-party variables set by afl-fuzz & other tools

Several variables are not directly interpreted by afl-fuzz, but are set to optimal values if not already present in the environment:

  • By default, LD_BIND_NOW is set to speed up fuzzing by forcing the linker to do all the work before the fork server kicks in. You can override this by setting LD_BIND_LAZY beforehand, but it is almost certainly pointless.

  • By default, ASAN_OPTIONS are set to (among others):

    abort_on_error=1
    detect_leaks=0
    malloc_context_size=0
    symbolize=0
    allocator_may_return_null=1

If you want to set your own options, be sure to include abort_on_error=1 - otherwise, the fuzzer will not be able to detect crashes in the tested app. Similarly, include symbolize=0, since without it, AFL++ may have difficulty telling crashes and hangs apart.

  • In the same vein, by default, MSAN_OPTIONS are set to:
    exit_code=86 (required for legacy reasons)
    abort_on_error=1
    symbolize=0
    msan_track_origins=0
    allocator_may_return_null=1
  • Similarly, the default LSAN_OPTIONS are set to:
    exit_code=23
    fast_unwind_on_malloc=0
    symbolize=0
    print_suppressions=0

Be sure to include the first ones for LSAN and MSAN when customizing anything, since some MSAN and LSAN versions don't call abort() on error, and we need a way to detect faults.