diff --git a/avaframe/com8MoTPSA/com8MoTPSACfg.ini b/avaframe/com8MoTPSA/com8MoTPSACfg.ini
index 4d16b0f51..0cde6616e 100644
--- a/avaframe/com8MoTPSA/com8MoTPSACfg.ini
+++ b/avaframe/com8MoTPSA/com8MoTPSACfg.ini
@@ -140,7 +140,7 @@ thFromIni =
 
 # Below are the settings for the MoT-PSA model
 [Run information]
-MoT-Voellmy input file version = 2023-03-06
+MoT-PSA input file version = 2026-06-16
 Area of Interest = Ryggfonn
 UTM zone = 33N
 EPSG geodetic datum code = 25833
@@ -150,19 +150,27 @@ Run name = Test_01
 Grid filename = -
 Release depth 1 filename = ./h1in08.asc
 Release depth 2 filename = ./h2in.asc
+# if Release density 1 file not provided - rho_1 (Density basal layer (kg/m³))
+Release density 1 filename = -
+# if Release density 2 file not provided - rho_2 (Ambient fluid density (kg/m^3))
+Release density 2 filename = -
 Bed depth filename = -
 Bed deposition filename = -
 Bed shear strength filename = -
 Forest density filename = -
 Tree diameter filename = -
-Start velocity u filename = -
-Start velocity v filename = -
+Start velocity u1 filename = -
+Start velocity v1 filename = -
+Start velocity u2 filename = -
+Start velocity v2 filename = -
 Output filename root = ./Run_01/01
 Output format = ESRI_ASCII_Grid
 
 [Physical_parameters]
 Gravitational acceleration (m/s^2) = 9.81
-Density (kg/m^3) = 250.0
+Ambient fluid density (kg/m^3) = 1.200
+Initial suspension density (kg/m^3) = 1.200
+Density basal layer (kg/m^3) = 250.0
 Rheology = Voellmy
 Parameters = auto
 Dry-friction coefficient (-) = 0.400
@@ -196,12 +204,12 @@ Bed density (kg/m^3) = 140.0
 Deposition = yes
 Deposition density L1 (kg/m^3) = 400.0
 Suspension model = TJSM
-Avalanche shear strength (Pa) = 0.0
-Avalanche shear strength deposit (Pa) = 0.0
-Decay coeff. snow s. s. suspension (-) = 1.0
-Decay coeff. snow s. s. deposition (-) = 1.0
-Entrainment coeff. m12 (-) = 0.0
-Deposition rate 21  (m/s) = 0.50
+Dense-flow surface strength (Pa) = 0.0
+Limit adhesion to substrate (Pa) = 0.0
+Adhesion attenuation coeff. (s/m) = 1.0
+Surface-strength attenuation (s/m) = 1.0
+Entrainment coeff. 1->2 (-) = 0.0
+Deposition rate 2->1  (m/s) = 0.50
 Constant density L1 = yes
 Evolving geometry = no
 
@@ -215,12 +223,12 @@ Write maximum pressure = yes
 Write instant. pressure = no
 Minimum flow depth (m) = 0.01
 Minimum speed (m/s) = 0.01
-Momentum threshold (-) = 0.05
+Momentum threshold (%) = 0.05
 Initial CFL number (-) = 0.8
 
 [EXPORTS]
 # peak files and plots are exported, option to turn off exports when exportData is set to False
 # this affects export of peak files and also generation of peak file plots
 exportData = True
-# use LZW compression when writing TIFF raster files
+# use LZW compression when writing TIFF raster files - TIFF format currently not supported
 useCompression = True