diff --git a/README.md b/README.md
index 235d72dd9..422e116b3 100644
--- a/README.md
+++ b/README.md
@@ -74,6 +74,7 @@ Trassir TR-D4121IR1 v2   HI3516CV200  AR0237    -                NOR_16M   done
 Trassir TR-W2C1 v1       SSC325       GC2053    MT7601U_USB      NOR_16M   done
 Trassir TR-W2C1 v2       SSC335       GC2053    MT7601U_USB      NOR_16M   done
 Tuya GV7630-T31-PTZ      T31L         SC2336    ATBM6012B_USB    NOR_8M    in progress
+Tuya/Moes WCM-P52        T31L         SC3338    ATBM6012B-X_USB  NOR_8M    in progress
 Umea QC012               GK7102C_A    MIS2003   RDA5995_USB      MOR_8M    wip
 Uniview C1L-2WN-G        SSC335DE     OS02G10   RTL8188FU_USB    NOR_16M   done
 Vixand IPC-1             GK7205V200   none      EC200N_USB       NOR_8M    frozen
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/br-ext-chip-ingenic/configs/t31_lite_tuya_moes_wcm-p52_defconfig b/devices/t31_lite_tuya_moes_wcm-p52/br-ext-chip-ingenic/configs/t31_lite_tuya_moes_wcm-p52_defconfig
new file mode 100644
index 000000000..e9a039030
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/br-ext-chip-ingenic/configs/t31_lite_tuya_moes_wcm-p52_defconfig
@@ -0,0 +1,104 @@
+# Architecture
+BR2_mipsel=y
+BR2_mips_xburst=y
+# BR2_MIPS_SOFT_FLOAT is not set
+BR2_MIPS_FP32_MODE_32=y
+
+# Toolchain
+BR2_TOOLCHAIN_EXTERNAL=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
+BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
+BR2_TOOLCHAIN_EXTERNAL_URL="https://github.com/openipc/firmware/releases/download/$(OPENIPC_TOOLCHAIN).tgz"
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_PREFIX="mipsel-openipc-linux-musl"
+BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
+BR2_TOOLCHAIN_EXTERNAL_CUSTOM_MUSL=y
+BR2_TOOLCHAIN_EXTERNAL_CXX=y
+
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
+BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="https://github.com/openipc/linux/archive/$(OPENIPC_KERNEL).tar.gz"
+BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="$(EXTERNAL_VENDOR)/board/$(OPENIPC_SOC_FAMILY)/t31.generic.config"
+BR2_LINUX_KERNEL_LZMA=y
+
+# Filesystem
+BR2_PACKAGE_BUSYBOX_CONFIG="$(BR2_EXTERNAL)/package/busybox/busybox.config"
+BR2_PACKAGE_UBOOT_TOOLS=y
+BR2_PACKAGE_ZLIB=y
+# BR2_PACKAGE_IFUPDOWN_SCRIPTS is not set
+# BR2_PACKAGE_WIREGUARD_LINUX_COMPAT=y
+# BR2_PACKAGE_WIREGUARD_TOOLS=y
+BR2_PACKAGE_WIRELESS_TOOLS=y
+BR2_PACKAGE_WPA_SUPPLICANT=y
+BR2_PACKAGE_WPA_SUPPLICANT_CLI=y
+BR2_PACKAGE_WPA_SUPPLICANT_PASSPHRASE=y
+BR2_TARGET_ROOTFS_CPIO=y
+BR2_TARGET_ROOTFS_SQUASHFS=y
+BR2_TARGET_ROOTFS_SQUASHFS4_XZ=y
+
+# OpenIPC
+BR2_OPENIPC_SOC_VENDOR="ingenic"
+BR2_OPENIPC_SOC_MODEL="t31"
+BR2_OPENIPC_SOC_FAMILY="t31"
+BR2_OPENIPC_SNS_MODEL="sc3338"
+BR2_OPENIPC_VARIANT="lite"
+BR2_OPENIPC_FLASH_SIZE="8"
+
+# Packages
+CONFIG_CFG80211=m
+# CONFIG_NL80211_TESTMODE is not set
+# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set
+# CONFIG_CFG80211_REG_DEBUG is not set
+# CONFIG_CFG80211_CERTIFICATION_ONUS is not set
+CONFIG_CFG80211_DEFAULT_PS=y
+# CONFIG_CFG80211_DEBUGFS is not set
+# CONFIG_CFG80211_INTERNAL_REGDB is not set
+CONFIG_CFG80211_WEXT=y
+# CONFIG_LIB80211 is not set
+# CONFIG_CFG80211_ALLOW_RECONNECT is not set
+CONFIG_MAC80211=m
+CONFIG_MAC80211_HAS_RC=y
+# CONFIG_MAC80211_RC_PID is not set
+CONFIG_MAC80211_RC_MINSTREL=y
+CONFIG_MAC80211_RC_MINSTREL_HT=y
+CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y
+CONFIG_MAC80211_RC_DEFAULT="minstrel_ht"
+# CONFIG_MAC80211_MESH is not set
+# CONFIG_MAC80211_DEBUGFS is not set
+# CONFIG_MAC80211_MESSAGE_TRACING is not set
+# CONFIG_MAC80211_DEBUG_MENU is not set
+# CONFIG_MAC80211_HWSIM is not set
+
+BR2_PACKAGE_ATBM_WIFI=y
+BR2_PACKAGE_ATBM_WIFI_MODEL_6012B=y
+BR2_PACKAGE_ATBM_WIFI_USB_PID=0x888B
+
+CONFIG_MFD_JZ_SADC_V13=y
+CONFIG_MFD_JZ_SADC_AUX=y
+CONFIG_MFD_JZ_TCU=y
+# BR2_PACKAGE_ONVIF_SIMPLE_SERVER=y
+
+BR2_PACKAGE_BWM_NG=y
+BR2_PACKAGE_DROPBEAR_OPENIPC=y
+BR2_PACKAGE_GPIO_MOTORS=y
+BR2_PACKAGE_INGENIC_OSDRV_T31=y
+BR2_PACKAGE_IPCTOOL=y
+BR2_PACKAGE_JSONFILTER=y
+BR2_PACKAGE_LIBCURL_OPENIPC=y
+BR2_PACKAGE_LIBCURL_OPENIPC_CURL=y
+BR2_PACKAGE_LIBCURL_OPENIPC_PROXY_SUPPORT=y
+# BR2_PACKAGE_LIBCURL_OPENIPC_COOKIES_SUPPORT is not set
+# BR2_PACKAGE_LIBCURL_OPENIPC_EXTRA_PROTOCOLS_FEATURES is not set
+BR2_PACKAGE_LIBEVENT_OPENIPC=y
+BR2_PACKAGE_LIBOGG_OPENIPC=y
+BR2_PACKAGE_MAJESTIC_FONTS=y
+BR2_PACKAGE_MAJESTIC_WEBUI=y
+BR2_PACKAGE_MAJESTIC=y
+BR2_PACKAGE_MBEDTLS_OPENIPC=y
+BR2_PACKAGE_MOTORS=y
+BR2_PACKAGE_OPUS_OPENIPC=y
+BR2_PACKAGE_OPUS_OPENIPC_FIXED_POINT=y
+BR2_PACKAGE_QUIRC_OPENIPC=y
+BR2_PACKAGE_VTUND_OPENIPC=y
+BR2_PACKAGE_YAML_CLI=y
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/rc.local b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/rc.local
new file mode 100755
index 000000000..6b14b7d25
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/rc.local
@@ -0,0 +1,20 @@
+#!/bin/sh
+#
+# rc.local
+#
+# This script is executed at the end of each multiuser runlevel.
+# Make sure that the script will "exit 0" on success or any other
+# value on error.
+#
+# In order to enable or disable this script just change the execution
+# bits.
+#
+# By default this script does nothing.
+
+
+(resetd.sh >/dev/null 2>&1) &
+#
+(while true; do sleep 30; checker=$(pidof majestic); if [[ -z $checker ]]; then /etc/init.d/S95majestic start; fi; done) &
+
+
+exit 0
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/wireless/usb b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/wireless/usb
new file mode 100755
index 000000000..3c968d02a
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/etc/wireless/usb
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+set_gpio() {
+	[ "$2" -eq 1 ] && gpio set $1 || gpio clear $1
+	sleep 1
+}
+
+# T31L MOES WCM-p52
+if [ "$1" = "atbm601x-t31-moes-wcm-p52" ]; then
+	#set_gpio 6 1
+	modprobe atbm6012b_wifi_usb
+	exit 0
+fi
+
+exit 1
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/sbin/resetd.sh b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/sbin/resetd.sh
new file mode 100644
index 000000000..abe2b0e24
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/sbin/resetd.sh
@@ -0,0 +1,37 @@
+#!/bin/sh
+
+if [ -e /usr/share/openipc/gpio.conf ]; then
+        . /usr/share/openipc/gpio.conf
+fi
+
+
+[ -z $button ] && echo "GPIO pin for resetd is not set" | logger -t resetd && exit
+
+# Counter for button press until reset
+count=0
+
+# prepare the pin
+if [ ! -d /sys/class/gpio/gpio${button} ]; then
+	echo "${button}" > /sys/class/gpio/export
+	echo "in" > /sys/class/gpio/gpio${button}/direction
+fi
+
+# continuously monitor current value of reset switch
+while [ true ]; do
+	if [ "$(cat /sys/class/gpio/gpio${button}/value)" -eq 1 ]; then
+		count=0
+	else
+		count=$((count+1))
+		# 20 counts =~ 5 seconds @ 0.25 sleep intervals
+		if [ $count -eq 20 ]; then
+			#echo 'SET WIFI' | logger -t resetd
+			#fw_setenv wlanssid WIFI
+			#fw_setenv wlanpass 12345678
+			for a in $(seq 10) ; do (gpio toggle ${led1} ; sleep 0.3 ; gpio toggle ${led1} ; sleep 0.3) ; done >/dev/null 2>&1
+			echo 'RESETTING FIRMWARE' | logger -t resetd
+			firstboot
+		fi
+	fi
+	# This interval uses 1% CPU. Less sleep = more CPU
+	sleep 0.25
+done
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/customizer.sh b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/customizer.sh
new file mode 100755
index 000000000..bf49acbe4
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/customizer.sh
@@ -0,0 +1,57 @@
+#!/bin/sh
+#
+# Perform basic settings on a known IP camera
+#
+#
+# Set custom upgrade url
+#
+# fw_setenv upgrade 'https://github.com/OpenIPC/builder/releases/download/latest/t31_lite_tuya_moes_wcm-p52-nor.tgz'
+#
+#
+# Set custom majestic settings
+#
+cli -s .isp.blkCnt 1
+cli -s .video0.codec h264
+cli -s .nightMode.irCutPin1 57
+cli -s .nightMode.irCutPin2 58
+cli -s .nightMode.backlightPin 6
+cli -s .nightMode.monitorDelay 5
+cli -s .osd.enabled true
+cli -s .osd.template "OpenIPC | %F %T %Z"
+cli -s .audio.enabled true
+cli -s .audio.codec aac
+cli -s .audio.srate 48000
+cli -s .audio.volume 95
+cli -s .audio.gain 25
+cli -s .audio.outputEnabled true
+cli -s .audio.outputVolume 80
+cli -s .audio.speakerPin 7
+cli -s .audio.speakerPinInvert true
+cli -s .onvif.enabled false
+#
+#
+# Set wlan device and credentials if need
+#
+fw_setenv wlandev atbm601x-t31-moes-wcm-p52
+#fw_setenv wlanssid Router
+#fw_setenv wlanpass 12345678
+#
+#
+# Set osmem and rmem
+#
+fw_setenv osmem 37M@0x0
+fw_setenv rmem 27M@0x2500000
+#
+# Set motor and mmc
+#
+#fw_setenv gpio_mmc 61
+fw_setenv ptz true
+fw_setenv gpio_motors '54 52 53 64 63 62 61 51'
+#
+#
+#adduser viewer -s /bin/false -D -H ; echo viewer:123456 | chpasswd
+#
+(sleep 3 ; reboot -f) &
+#
+
+exit 0
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/gpio.conf b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/gpio.conf
new file mode 100644
index 000000000..d4b67101c
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/gpio.conf
@@ -0,0 +1,13 @@
+# alarm_in=-1
+# alarm_out=-1
+# button=62
+# ircut1=49
+# ircut2=50
+# led1=-1
+# led2=-1
+# light_ir=59
+# light_wl=60
+# light_sensor=-1
+# mmc_pwr=61
+# speaker=63
+# usb=6
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/muxes.sh b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/muxes.sh
new file mode 100755
index 000000000..5dbe5f47d
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/overlay/usr/share/openipc/muxes.sh
@@ -0,0 +1,4 @@
+#!/bin/sh
+
+### set leds to off ###
+gpio clear 16
diff --git a/devices/t31_lite_tuya_moes_wcm-p52/general/scripts/excludes/t23_lite.list b/devices/t31_lite_tuya_moes_wcm-p52/general/scripts/excludes/t23_lite.list
new file mode 100644
index 000000000..95850ab0d
--- /dev/null
+++ b/devices/t31_lite_tuya_moes_wcm-p52/general/scripts/excludes/t23_lite.list
@@ -0,0 +1,32 @@
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/algos/i2c-algo-bit.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/i2c/busses/i2c-gpio.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/cdc_ether.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/rndis_host.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/net/usb/usbnet.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/option.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usb_wwan.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/drivers/usb/serial/usbserial.ko
+/lib/modules/3.10.14__isvp_swan_1.0__/kernel/fs/f2fs/f2fs.ko
+#
+/etc/sensor/gc2053-t23.bin
+/etc/sensor/gc2053.yaml
+/etc/sensor/imx327-t23.bin
+/etc/sensor/imx327.yaml
+/etc/sensor/jxf23-t23.bin
+/etc/sensor/jxf23.yaml
+/etc/sensor/jxf37pa-t23.bin
+/etc/sensor/jxf37pa.yaml
+/etc/sensor/jxh63p-t23.bin
+/etc/sensor/jxh63p.yaml
+#/etc/sensor/sc1346-t23.bin
+#/etc/sensor/sc1346.yaml
+#/etc/sensor/sc1a4t-t23.bin
+#/etc/sensor/sc1a4t.yaml
+/etc/sensor/sc200ai-t23.bin
+/etc/sensor/sc200ai.yaml
+/etc/sensor/sc2310-t23.bin
+/etc/sensor/sc2310.yaml
+/etc/sensor/sc2331-t23.bin
+/etc/sensor/sc2331.yaml
+/etc/sensor/sc301IoT-t23.bin
+/etc/sensor/sc301IoT.yaml