Framework Laptop 13 © 2022 by Framework Computer Inc is licensed under CC BY 4.0. To view a copy of this license, visit http://creativecommons.org/licenses/by/4.0/
This is the ZIF connector for the keyboard, using a Kyocera 046809626210846+ part.
| Pin | Signal | Notes |
|---|---|---|
| 1 | KSI0 | |
| 2 | KSI1 | |
| 3 | KSI2 | |
| 4 | KSI3 | |
| 5 | KSI4 | |
| 6 | KSI5 | |
| 7 | KSI6 | |
| 8 | KSI7 | |
| 9 | KSO0 | |
| 10 | KSO1 | |
| 11 | KSO2 | |
| 12 | KSO3 | |
| 13 | KSO4 | |
| 14 | KSO5 | |
| 15 | KSO6 | |
| 16 | KSO7 | |
| 17 | KSO8 | |
| 18 | KSO9 | |
| 19 | KSO10 | |
| 20 | KSO11 | |
| 21 | KSO12 | |
| 22 | KSO13 | |
| 23 | KSO14 | |
| 24 | KSO15 | |
| 25 | CAPS_P | 5V |
| 26 | CAPS_N |
The ZIF connector for the keyboard backlight, using a ACES 51601-0040M-001 part.
| Pin | Signal | Notes |
|---|---|---|
| 1 | KBL_N | |
| 2 | KBL_N | |
| 3 | KBL_P | 5V |
| 4 | KBL_P | 5V |
The ZIF connector for the Fingerprint Reader, using a Kyocera 046809610110846+ part.
| Pin | Signal | Notes | Voltage |
|---|---|---|---|
| 1 | VBUS | Power | 5V |
| 2 | USB_DM | USB Data | |
| 3 | USB_DP | USB Data | |
| 4 | GND | Power | |
| 5 | EC_CONTROL | Output - mask switch events | |
| 6 | SWITCH | Open collector output | |
| 7 | LED_W | ||
| 8 | LED_G | ||
| 9 | LED_R | ||
| 10 | LED_COM | 5V |
The ZIF connector for the FPC going to the Mainboard, using a ACES 51688-0510M-001 part.
| Pin | Signal | Notes | Voltage |
|---|---|---|---|
| 1 | GND | ||
| 2 | KSI0 | ||
| 3 | KSI1 | ||
| 4 | KSI2 | ||
| 5 | KSI3 | ||
| 6 | KSI4 | ||
| 7 | KSI5 | ||
| 8 | KSI6 | ||
| 9 | KSI7 | ||
| 10 | KSO0 | ||
| 11 | KSO1 | ||
| 12 | KSO2 | ||
| 13 | KSO3 | ||
| 14 | KSO4 | ||
| 15 | KSO5 | ||
| 16 | KSO6 | ||
| 17 | KSO7 | ||
| 18 | KSO8 | ||
| 19 | KSO9 | ||
| 20 | KSO10 | ||
| 21 | KSO11 | ||
| 22 | KSO12 | ||
| 23 | KSO13 | ||
| 24 | KSO14 | ||
| 25 | KSO15 | ||
| 26 | GND | ||
| 27 | CAPS_P | 5V Supply | |
| 28 | CAPS_N | ||
| 29 | KBL_N | ||
| 30 | KBL_P | 5V supply (PWM) | |
| 31 | KBL_N | ||
| 32 | KBL_P | 5V supply (PWM) | |
| 33 | GND | ||
| 34 | TP_SCL | ||
| 35 | TP_INT | ||
| 36 | TP_SDA | ||
| 37 | GND | ||
| 38 | BOARD_ID | ||
| 39 | Reserved | Not connected | |
| 40 | 5VS | 5V | |
| 41 | 5VALW | Always on supply | 5V |
| 42 | USB_DM | ||
| 43 | GND | ||
| 44 | USB_DP | ||
| 45 | EC_CONTROL | ||
| 46 | SWITCH | ||
| 47 | LED_R | See [1] | |
| 48 | LED_G | See [1] | |
| 49 | LED_B | See [1] | |
| 50 | LED_COM | 5V | |
| 51 | Reserved | Not connected |
- [1] The mainboard EC drives these LED's through low-side transistors. The RGB channels from the EC drive the white, green, and red fingerprint LED's, respectively.