how to save inpaint resolution, i wanna set it to 1024x1024

[koloved]

title

[dosubot[bot]]

To save the inpaint resolution and set it to 1024x1024, you need to adjust the values of w.ad_inpaint_width and w.ad_inpaint_height to 1024. Here is the relevant code snippet with the updated values:

w.ad_inpaint_width = gr.Slider(
    label="inpaint width" + suffix(n),
    minimum=64,
    maximum=2048,
    step=4,
    value=1024,  # Set the width to 1024
    visible=True,
    elem_id=eid("ad_inpaint_width"),
)

w.ad_inpaint_height = gr.Slider(
    label="inpaint height" + suffix(n),
    minimum=64,
    maximum=2048,
    step=4,
    value=1024,  # Set the height to 1024
    visible=True,
    elem_id=eid("ad_inpaint_height"),
)

This will set the inpaint resolution to 1024x1024 ^[1].

To continue talking to Dosu, mention @dosu.

[koloved]

@dosu , did it but the default size is still 512

[dosubot[bot]]

Make sure to also check the args.py file. The default inpaint resolution might be set there as well:

ad_inpaint_width: PositiveInt = 512
ad_inpaint_height: PositiveInt = 512

Change these values to 1024 to ensure the default resolution is set correctly ^[1].

To continue talking to Dosu, mention @dosu.

[koloved]

@dosu, not working, tried restart UI,, not helped

[dosubot[bot]]

Ensure that the ad_use_inpaint_width_height setting is enabled, as it determines whether the specific inpaint width and height values are used. You can check this in the configuration or command-line arguments. If it's not enabled, the default values might still be applied ^[1]. Additionally, verify if there are any functions dynamically adjusting the inpaint resolution, such as get_optimal_crop_image_size, which might override your settings based on certain conditions ^[2].

To continue talking to Dosu, mention @dosu.

---

^{Help Dosu learn! Give it feedback: Great Response | Irrelevant Answer | Incorrect Sources | Too Verbose | Hallucination | Other}

[koloved]

answer:

Go into Settings > Default and press "Apply Settings", now they are saved as your defaults in the "config.json" file, that goes for all tabs, prompts, etc. No extension needed, backup/rename as you like.
Adetailer settings include